Difference between revisions of "SYNTH-MIDI-CTL-01"

Revision as of 08:58, 23 September 2022

Adapted from HAGIWO's MIDI to CV module
- Translate from Japanese to English using browser
Controller is XAIO RP2040
- Arduino MIDI library has not yet been ported to Pico so will need to use CircuitPython
MIDI In
- Standard MIDI Jacks
- MIDI out jack for future functionality
(2) 0-5V Analog CV outs
- MCP4822 12-bit D/A - SPI Interface
- Use with SYNTH-VCO-01
- CV1 = V/OCT
- CV2 = MOD
Digital Outs
- Gate
- Clock
Pot supports setting Clock rate
Standard EuroRack 6 pin header
- Supports 12V in with on-board 5V regulator
- 5V regulator can be not installed if 5V is available on EuroRack connection
Card is not a Eurorack card
- Probably too deep, needs cabling

elkayem midi2cv GitHub page _ Nano based project
- Arduino MIDI library has not yet been ported to Pico so will need to use Python
- Drives 4 CV outputs: Pitch Blend, Control, Note, Velocity
- This card only drives Note (Voltes/Oct, Mod)
MIDI Controller in Python
Principles of Voltage Control
Creative Control Strategies: MIDI to CV
EuroPi
Eurorack Beginners Guide
Eurorack Wiki page
PicoPicoSynth

@@ Line 9: / Line 9: @@
 * MIDI In
 ** Standard MIDI Jacks
-** MIDI out jack fir future functionality
+** MIDI out jack for future functionality
-* 0-5V Analog CV outs
+* (2) 0-5V Analog CV outs
 ** [https://www.mouser.com/ProductDetail/Microchip-Technology-Atmel/MCP4822-E-P?qs=sGAEpiMZZMtgJDuTUz7Xu5a0A%252BlHhkxt3QSpqvc4zyk%3D MCP4822 12-bit D/A] - SPI Interface
-** MOD
+** Use with [[SYNTH-VCO-01]]
-** V/OCT
+** CV1 = V/OCT
+** CV2 = MOD
 * Digital Outs
 ** Gate