Difference between revisions of "SYNTH-MIDI-CV4-01"

Revision as of 16:16, 23 September 2022

Adapted from HAGIWO's MIDI to CV module
- Translate from Japanese to English using browser
- Removes Digital Outputs
- Has 4 Analog Outputs
Controller is XAIO RP2040
- Arduino MIDI library has not yet been ported to Pico so will need to use CircuitPython
MIDI In
- Standard MIDI Jacks
- MIDI out jack for future functionality
(4) 0-5V Analog CV outs
- MCP4822 12-bit D/A - SPI Interface
  - MCP4822 Datasheet
- Use with SYNTH-VCO-01
  - CV_1 = V/OCT
  - CV_2 = MOD
Standard EuroRack 16 pin header
- Supports 12V in with on-board 5V regulator
- 5V regulator can be not installed if 5V is available on EuroRack connection
Card is not a Eurorack card
- Probably too deep, needs cabling
(6) 6-32 Mounting holes
- Stacks with SYNTH-VCO-01 card

@@ Line 3: / Line 3: @@
 * Adapted from [https://note.com/solder_state/n/n17e028497eba HAGIWO's MIDI to CV module]
 ** Translate from Japanese to English using browser
+** Removes Digital Outputs
+** Has 4 Analog Outputs
 * Controller is XAIO RP2040
 ** Arduino MIDI library has '''not''' yet been ported to Pico so will need to use CircuitPython
@@ Line 12: / Line 14: @@
 *** [https://www.mouser.com/datasheet/2/268/21953a-8929.pdf MCP4822 Datasheet]
 ** Use with [[SYNTH-VCO-01]]
-*** CV1 = V/OCT
+*** CV_1 = V/OCT
-*** CV2 = MOD
+*** CV_2 = MOD
 * Standard EuroRack 16 pin header
 ** Supports 12V in with on-board 5V regulator