Difference between revisions of "MIDI-IN-OUT"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 60: | Line 60: | ||
[[File:4N28-SwitchingTime.PNG]] | [[File:4N28-SwitchingTime.PNG]] | ||
| − | + | {| class="wikitable" | |
| − | + | ! Vcc | |
| − | + | ! 5.000 | |
| − | + | ! V | |
| − | + | |- | |
| + | | Vf LED | ||
| + | | 1.200 | ||
| + | | V | ||
| + | |- | ||
| + | | Res ser | ||
| + | | 660.000 | ||
| + | | Ohms | ||
| + | |- | ||
| + | | If LED | ||
| + | | 5.758 | ||
| + | | mA | ||
| + | |- | ||
| + | | CTR (min) | ||
| + | | 0.200 | ||
| + | | A/A | ||
| + | |- | ||
| + | | Iout | ||
| + | | 1.152 | ||
| + | | mA | ||
| + | |- | ||
| + | |} | ||
Revision as of 13:52, 29 September 2022
Contents
Features
- Module for Prototyping Synthesizer components
- MIDI In/Out Jacks
- Opto-isolated MIDI Input
- 5V MIDI interface
- 3.3V or 5V Serial connections
- MIDI In is opto-isolated
- (2) 4-40 Mounting holes
Connectors
J1 - MIDI In
- Opto-isolated input
J2 - MIDI Out
J3 - Serial/Power
- Pinout
- V1 (3.3V or 5V
- 5V
- Receive data (out of card)
- Transmit (in to card)
- GND
J4 - Short V1 to 5V
- Short J3-1 to J3-2
- Used when Host Serial interface is 5V
- Open when Host Serial interface is 3.3V
Drive Circuit
- 4N25 Optocoupler
- DC Current Transfer Ratio
- LED Current vs voltage
- Output transistor capacitance
- Switching Time
| Vcc | 5.000 | V |
|---|---|---|
| Vf LED | 1.200 | V |
| Res ser | 660.000 | Ohms |
| If LED | 5.758 | mA |
| CTR (min) | 0.200 | A/A |
| Iout | 1.152 | mA |
