Difference between revisions of "RPPSOC"

From Land Boards Wiki
Jump to navigation Jump to search
Line 29: Line 29:
 
* Two I/O connectors
 
* Two I/O connectors
 
* 14 + 16 = 30 I/O pins
 
* 14 + 16 = 30 I/O pins
 +
 +
== Headers / Connectors ==
 +
 +
=== H1 - Programming Header ===
 +
 +
[[file:RPPSOC_H1.PNG]]
 +
 +
=== H2 - EEPROM Write Enable ===
 +
 +
[[file:RPPSOC_H2.PNG]]
 +
 +
=== H3/H4 - I/O Voltage Select ===
 +
 +
[[file:RPPSOC_H3_H4.PNG]]
 +
 +
=== J1 - Raspberry Pi GPIO Connector ===
 +
 +
[[file:RPPSOC_J1.PNG]]
 +
 +
=== P3 - I/O connector ===
 +
 +
[[file:RPPSOC_P3.PNG]]
 +
 +
=== P4 - I/O connector ===
 +
 +
[[file:RPPSOC_P4.PNG]]
  
 
== Drivers/Example Code ==
 
== Drivers/Example Code ==

Revision as of 13:07, 4 October 2022

Tindie-mediums.png

Raspberry Pi System-on-a-Chip

RPPSOC-P1010074-800px.jpg

Features

  • PSOC part CY8C5267AXI-LP051
    • Core: ARM Cortex M3
    • Data Bus Width: 32 bit
    • Maximum Clock Frequency: 67 MHz
    • Program Memory Size: 128 kB
    • Data RAM Size: 32 kB
    • ADC Resolution: 12 bit
    • Data RAM Type: SRAM
    • Interface Type: I2C, USB
    • Number of ADC Channels: 1
    • Number of I/Os: 72 I/O
    • Number of Timers/Counters: 4 Timer
    • Program Memory Type: Flash
  • Works on all Raspberry Pi cards with 40 pin GPIO (A+/B+/Pi2/Pi3/Zero)
  • All 29 Raspberry Pi I/O lines are connected to the PSOC
  • 3 of the lines are used for programming the PSSoC
  • Configuration EEPROM
  • Fuses on 3.3V and 5V power
  • Two I/O connectors
  • 14 + 16 = 30 I/O pins

Headers / Connectors

H1 - Programming Header

RPPSOC H1.PNG

H2 - EEPROM Write Enable

RPPSOC H2.PNG

H3/H4 - I/O Voltage Select

RPPSOC H3 H4.PNG

J1 - Raspberry Pi GPIO Connector

RPPSOC J1.PNG

P3 - I/O connector

RPPSOC P3.PNG

P4 - I/O connector

RPPSOC P4.PNG

Drivers/Example Code

Schematic

Test Procedure

RPPSOC-GPIO18Blink Schematic.PNG

Assembly Sheet

Retrieved from "http://land-boards.com/blwiki/index.php?title=RPPSOC&oldid=20424"