Difference between revisions of "RPPSOC"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 55: | Line 55: | ||
=== J1 - Raspberry Pi GPIO Connector === | === J1 - Raspberry Pi GPIO Connector === | ||
| − | |||
| − | |||
[[file:RPPSOC_J1.PNG]] | [[file:RPPSOC_J1.PNG]] | ||
Revision as of 13:43, 4 October 2022
Contents
Raspberry Pi System-on-a-Chip
Features
- PSOC part CY8C5267AXI-LP051
- Core: ARM Cortex M3
- Data Bus Width: 32 bit
- Maximum Clock Frequency: 67 MHz
- Program Memory Size: 128 kB
- Data RAM Size: 32 kB
- ADC Resolution: 12 bit
- Data RAM Type: SRAM
- Interface Type: I2C, USB
- Number of ADC Channels: 1
- Number of I/Os: 72 I/O
- Number of Timers/Counters: 4 Timer
- Program Memory Type: Flash
- Works on all Raspberry Pi cards with 40 pin GPIO (A+/B+/Pi2/Pi3/Zero)
- All 29 Raspberry Pi I/O lines are connected to the PSOC
- 3 of the lines are used for programming the PSSoC
- Configuration EEPROM
- Fuses on 3.3V and 5V power
- Two I/O connectors
- 14 + 16 = 30 I/O pins
Headers / Connectors
H1 - Programming Header
H2 - EEPROM Write Enable
H3/H4 - I/O Voltage Select
J1 - Raspberry Pi GPIO Connector
P3 - I/O connector
P4 - I/O connector
Drivers/Example Code
- RPPSOC GitHub Repo
- LB-RPPSOC GitHub Repo
- RPPSOC GitHub Repo
- HSSP_Programmer - Code that programs PSoC from the Raspberry Pi (.o files)
- EEPROM file - Data in the On-Board EEPROM
Schematic
Test Procedure
- Unit Under Test (UUT)
- Raspberry Pi 2
- RPPSOC running RPPSOC-GPIO18Blink
