Difference between revisions of "ER-PROTO-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 17: | Line 17: | ||
** Pots more often accessed than jacks | ** Pots more often accessed than jacks | ||
* Large prototyping area | * Large prototyping area | ||
| + | ** 58 nodes with 3 holes per node (29 per "side") | ||
* +12V, -12V down board edges | * +12V, -12V down board edges | ||
* 5V/GND down center of card | * 5V/GND down center of card | ||
Revision as of 12:20, 25 October 2022
Features
- Eurorack Prototyping card set
- 6 HP wide (30mm) front panel
- 3U tall
- Three card set
- Board interconnect headers duplicated on headers
- 6 POTS
- Series resistors on pot wiper
- All 3 pot pins brought to top header
- 4 Jacks
- Tip/sleeve brought to header near middle/bottom
- Pots on top, jacks on bottom
- Easier to adjust pots without bumping into pots
- Pots more often accessed than jacks
- Large prototyping area
- 58 nodes with 3 holes per node (29 per "side")
- +12V, -12V down board edges
- 5V/GND down center of card
- Bussed connections horizontally
- Front Panel with generic labels
- Cover with White on Black P-Touch labels
Example
- Arduino NANO with quad Opamp example
