Difference between revisions of "ER-MIDI-CV4-02"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 35: | Line 35: | ||
== Connectors == | == Connectors == | ||
| − | * J1 | + | * J1 = Eurorack Power |
| − | * J2 | + | * J2 = CVs, GATE, CLK (to/from Controls card) |
| − | * J3 | + | * J3 = I2C |
| − | * J4 | + | * J4 = MIDI (to/from Controls card) |
| − | * J5 | + | * J5 = MIDI into RX ( Remove to use MIDI from Controls card |
== Application == | == Application == | ||
Revision as of 17:08, 2 November 2022
Features
- Eurorack 6HP, 3U module
- Adapted from HAGIWO's MIDI to CV module
- Translate from Japanese to English using browser
- Removes Digital Outputs
- Has 4 Analog Outputs instead of 2
- Based also on SYNTH-MIDI-CV4-01
- Arduino Pro Mini
- 16 MHz
- 5V
- MIDI In
- TRS Type A jack MIDI In
- USB MIDI In
- (4) 0-5V Analog CV outs
- MCP4822 12-bit D/A - SPI Interface
- GATE output
- CLK output
- Standard EuroRack 16 pin power header
Arduino Pins
- Analog 1 - Speed Adjust POT
- A4 = SDA
- A5 = SCL
- D8 = LDAC1
- D9 = LDAC2
- D13 = SPI CSK
- D11 = SPI MOSI
- D10 = SLAVE SELECT
Connectors
- J1 = Eurorack Power
- J2 = CVs, GATE, CLK (to/from Controls card)
- J3 = I2C
- J4 = MIDI (to/from Controls card)
- J5 = MIDI into RX ( Remove to use MIDI from Controls card
Application
- Use with ER-VCO-03 to control pitch and Mod
- CV_1 = V/OCT
- CV_2 = MOD
- Use with ER-VCA2-01 to control amplitude
