Difference between revisions of "ER-PROTO-01"

From Land Boards Wiki
Jump to navigation Jump to search
Line 92: Line 92:
  
 
[[FILE:ER-MOZZI-PARTS_CAD.PNG]]
 
[[FILE:ER-MOZZI-PARTS_CAD.PNG]]
 +
 +
{| class="wikitable"
 +
! Find
 +
! Qty
 +
! Ref Des
 +
! Part Number
 +
|-
 +
| 1
 +
| 2
 +
| R7, R8
 +
| 100K
 +
|-
 +
| 2
 +
| 2
 +
| R9, R10
 +
| 10K
 +
|-
 +
| 3
 +
| 2
 +
| R11, R14
 +
| 3.9K
 +
|-
 +
| 4
 +
| 2
 +
| R12, R13
 +
| 1M
 +
|-
 +
| 5
 +
| 4
 +
| D1-D4
 +
| BAT41
 +
|-
 +
| 6
 +
| 8
 +
| C1-C8
 +
| 0.1uF
 +
|-
 +
| 7
 +
| 1
 +
| C9
 +
| 4.7nF
 +
|-
 +
| 8
 +
| 1
 +
| C10
 +
| 10nF
 +
|-
 +
| 9
 +
| 1
 +
| J5
 +
| HEADER, 2X10
 +
|-
 +
| 10
 +
| 1
 +
| J6
 +
| [https://store.synthrotek.com/16-Pin_Keyed_Shrouded_Eurorack_Power_Header HEADER, 2X8]
 +
|-
 +
| 11
 +
| 1
 +
| J10
 +
| HEADER, 1x8
 +
|-
 +
| 12
 +
| 1
 +
| A1
 +
| Arduino_Nano_v3
 +
|-
 +
|}
  
 
=== Arduino NANO with quad Opamp example ===
 
=== Arduino NANO with quad Opamp example ===
  
 
[[file:ER-PROTO-DB-01_ARDUINO_NANO_OPAMP-720px.png]]
 
[[file:ER-PROTO-DB-01_ARDUINO_NANO_OPAMP-720px.png]]

Revision as of 13:57, 7 November 2022

ER-PROTO-PANEL-01-SET FRONT REAR-3D-720px.png

Features

  • Eurorack Prototyping card set
  • 6 HP wide (30mm) front panel
  • 3U tall
  • Three card set
    • Board interconnect headers duplicated on headers
    • 30mm wide front panel
    • 28mm wide panel and daughtercards
  • 6 POTS
    • Marked as RV1-RV5
    • Series resistors on pot wiper
    • All 3 pot pins brought to top header
  • 4 Jacks
    • Marked as J1-J4
    • Tip/sleeve brought to header near middle/bottom
  • Pots on top, jacks on bottom of card
    • Easier to adjust pots without bumping into pots
    • Pots more often accessed than jacks
  • Large prototyping area
    • 58 nodes with 3 holes per node (29 per "side")
  • +12V, -12V down board edges
  • 5V/GND down center of card
  • Bussed connections horizontally
  • Front Panel with generic labels
    • Cover with White on Black P-Touch labels

Connectors

  • J1-J4 are front panel connectors

Inter-card Connectors

Pots

  • J5 on the Controls card and J5 on the I/O card
  • Pot connections
    • POTx-1 is fully CW connects to wiper
    • POTx-2 is wiper
    • POTX-3 is fully CCW connects to wiper

RV Conns.PNG

  • To make pot into voltage control
    • POTx-1 (CW) = +5V
    • POTx-13CCW = GND
    • Wire RV1-1 to RV3-1 to RV5-1 on controls card
    • Wire RV1-3 to RV3-3 to RV5-3 on controls card
    • Wire RV2-1 to RV4-1 to RV6-1 on controls card
    • Wire RV2-3 to RV4-3 to RV6-3 on controls card

ER-PROTO-CTLS-6-01 J5.PNG

Jacks

  • J6 on the controls card and J37 on the I/O card

ER-PROTO-CTLS-6-01 J10.PNG

Daughtercard Connectors

J5, J37 - POT connectione

ER-PROTO-DB-01 J5.png

ER-PROTO-DB-01 J37.png

J6 - Eurorack Power

  • J6 on the I/O card
    • Eurorack power
    • 2x5 IDC
    • GATE, CV not connected

ER-PROTO-DB-01 J6.png

J10 - Jacks connections on Controls card

ER-PROTO-DB-01 J10.png

J38 - Jacks connections

ER-PROTO-DB-01 J38.png

Examples

Arduino NANO MOZZI

ER-MOZZI-PARTS 3D.PNG

ER-MOZZI-PARTS CAD.PNG

Find Qty Ref Des Part Number
1 2 R7, R8 100K
2 2 R9, R10 10K
3 2 R11, R14 3.9K
4 2 R12, R13 1M
5 4 D1-D4 BAT41
6 8 C1-C8 0.1uF
7 1 C9 4.7nF
8 1 C10 10nF
9 1 J5 HEADER, 2X10
10 1 J6 HEADER, 2X8
11 1 J10 HEADER, 1x8
12 1 A1 Arduino_Nano_v3

Arduino NANO with quad Opamp example

ER-PROTO-DB-01 ARDUINO NANO OPAMP-720px.png

Retrieved from "http://land-boards.com/blwiki/index.php?title=ER-PROTO-01&oldid=21726"