Eurorack Panel Jacks

• Winterbloom

Heights from board surface

• Heights
  • PJ-3410BM Mono Jack = 10.5mm
  • PJ-392 Mono Jack = 11.8mm
  • PJ-398SM Mono Jack = 9mm
  • PJ-366ST Stereo Jack = 9mm
  • A-6115 Stereo Jack = 9mm
  • PJ-3410 Stereo Jack = 13mm
  • DIN-5 SD-50BV MIDI Jack = 15.8mm

Vertical Mounted 3.5mm Panel Jacks

PJ-3410BM Mono Jack

• Note that the center of the jack is offset from the mounting pins
  • Many sites show the wrong footprint/offset which would lead to errors in lining up the hole
    • They sell the PJ-3410BM but show the PJ-3410B footprint

• PJ-3410BM on Thonk

PJ-398SM Mono Jack

• PJ-398SM on Thonk
• Sleeve, tip, switch on tip
• FROM NOW ON PLEASE PURCHASE PJ398SM below for THONKICONN (INSTEAD OF PJ301M-12)
• Note on MFOS Sound Lab Mini-Synth in SMT

Last “mistake”, I used the Erthenvar Jack footprints for the 4 Jack connectors. 
Those Jacks connectors are fine. In fact, I use them often. But I misjudged their height, 
compared to other control components, pots and switches. “Erthenvar Jacks” (WQP-PJ301BM is 11.5mm height,
 where other components are 10mm height.
The right alternative is WQP-PJ398SM. 
To use them instead, you need to bend the ground pin and add a bit of wire to join the PCB ground pad.

PJ-392 Mono Jack

PJ-366ST Stereo Jack

• PJ-366ST on Thonk
• Same as WQP-WQP419GR on AliExpress
• Original mfg of WQP-WQP419GR - $30 + $11.80 for 100 pcs

Tayda A-6115 Stereo Jack

PJ-3410 Stereo Jack

• PJ-3410 PN Thonk

MIDI Connectors

DIN-5 SD-50BV MIDI Jack

Horizontal Mounted Connectors

• MIDI Connector

DIN-5 MIDI Connector Female Right Angle

• Tayda A-1010
• Mfg P/N: TEDIN-D501

KiCad Footprints

• Clacktronics GitHub
• Winterbloom Kicad Library

Suppliers

• winterbloom - Thonk jacks, $0.50
• Thonk