Difference between revisions of "ER-SH-NOISE"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 26: | Line 26: | ||
* Credit Moritz Klein's [https://www.youtube.com/watch?v=0yB_h_wFkh4 Designing a white, pink & blue noise generator from scratch] design | * Credit Moritz Klein's [https://www.youtube.com/watch?v=0yB_h_wFkh4 Designing a white, pink & blue noise generator from scratch] design | ||
* Noise Generator | * Noise Generator | ||
| − | * Prototype on [[Noise Generator on ER-PROTO-01]] | + | * Prototype on [[Noise Generator on ER-PROTO-01]] card |
[[file:moritz_noise.PNG]] | [[file:moritz_noise.PNG]] | ||
Revision as of 20:03, 18 November 2022
Features
- Eurorack 6HP, 3U module
- LF398 Sample and Hold
- Based on schmitzbits YASH * (Yet another Sample and Hold) design
- Adjustable Internal Clock over-ridden by external jack
- Signal Level LED
- Noise Generator
- Based on Moritz Klein's Designing a white, pink & blue noise generator from scratch design
- White, Pink, Blue noise outputs
- Outputs are all buffered
- White noise routed to Sample and hold switch input
- If no jack is connected to the Sample and Hold Input jack, the input is from the white noise output
- 10 pin Eurorack power connector
Sample and Hold
Noise Generator
- Credit Moritz Klein's Designing a white, pink & blue noise generator from scratch design
- Noise Generator
- Prototype on Noise Generator on ER-PROTO-01 card
- White/Pink/Blue noise
- Low Pass Filter (Pink Noise)
- High Pass Filter (Blue Noise)
