Difference between revisions of "ER-LEDS"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (→Build) |
Blwikiadmin (talk | contribs) (→Build) |
||
| Line 29: | Line 29: | ||
* 1000 uF cap on 5V power | * 1000 uF cap on 5V power | ||
| + | * RV1, RV2 jumpers on controls card for Vcc/GND | ||
| + | ** Vcc is 5V from daughtercard | ||
[[FILE:ER_LEDS_P1090003_720PX.jpg]] | [[FILE:ER_LEDS_P1090003_720PX.jpg]] | ||
[[FILE:ER-LEDS_P1090004_720PX.jpg]] | [[FILE:ER-LEDS_P1090004_720PX.jpg]] | ||
Revision as of 13:58, 13 January 2023
Contents
Features
- Arduino_Pro_Mini
- Drives NeoPixel strip
- Daughtercard to ER-PROTO-02 card
- Uses Front Panel and Controls card
- 3U, 6 HP Eurorack card
- 16 pin (8x2) box power connector
- RV1 = Mode knob
- 4 modes: 3 rainbow, 1 white
- RV2 = brightness
- GATE input could be used to step between rainbow pattern
Arduino Pro Mini
Software
ER_LEDS.ino - Software Build
- RV1 - Pattern
- White
- Color
- RV2 - Brightness
Build
- 1000 uF cap on 5V power
- RV1, RV2 jumpers on controls card for Vcc/GND
- Vcc is 5V from daughtercard
