Difference between revisions of "ER-LEDS"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (→Build) |
Blwikiadmin (talk | contribs) |
||
| Line 13: | Line 13: | ||
* RV2 = brightness | * RV2 = brightness | ||
* GATE input could be used to step between rainbow pattern | * GATE input could be used to step between rainbow pattern | ||
| + | * LED strip types | ||
| + | ** Using 30 LEDs per 1 M | ||
| + | ** Other options are 60 LEDs/M or 144 LEDs/M | ||
== Arduino Pro Mini == | == Arduino Pro Mini == | ||
Revision as of 14:07, 13 January 2023
Contents
Features
- Arduino_Pro_Mini
- Drives NeoPixel strip
- Daughtercard to ER-PROTO-02 card
- Uses Front Panel and Controls card
- 3U, 6 HP Eurorack card
- 16 pin (8x2) box power connector
- RV1 = Mode knob
- 4 modes: 3 rainbow, 1 white
- RV2 = brightness
- GATE input could be used to step between rainbow pattern
- LED strip types
- Using 30 LEDs per 1 M
- Other options are 60 LEDs/M or 144 LEDs/M
Arduino Pro Mini
Software
ER_LEDS.ino - Software Build
- RV1 - Pattern
- White
- Color
- RV2 - Brightness
Build
- 1000 uF cap on 5V power
- RV1, RV2 jumpers on controls card for Vcc/GND
- Vcc is 5V from daughtercard
- GVS (Ground, Vcc, NeoPixel data line) on 1x3 header
