Difference between revisions of "Eurorack Box Build"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 12: | Line 12: | ||
* Glued together/clamped | * Glued together/clamped | ||
** Didn't use screws | ** Didn't use screws | ||
| − | * Did '''not''' use 1/4-20 screws | + | * Did '''not''' use 1/4-20 screws to mount rails |
| + | ** Drilled small holes into back of rails and screwed rails down w/ wood screws | ||
* Rails are flush to box edges | * Rails are flush to box edges | ||
* Next one | * Next one | ||
Revision as of 16:27, 16 January 2023
Box Construction
- 3/4" Red Oak plywood
- Spar varnish finish (no finished in photo)
- Synthrotek 84 HP rails with threaded nut strips (both come in pairs)
- 18-3/8" Wide, 84HP
- 6-1/2" tall, 3U
- 4-3/4" deep
- Glued together/clamped
- Didn't use screws
- Did not use 1/4-20 screws to mount rails
- Drilled small holes into back of rails and screwed rails down w/ wood screws
- Rails are flush to box edges
- Next one
- Screw in rails, power supply, power strip before gluing up box
Box Hotel Services
- Mean Well Power Supply
- RT-85B
- 88W Power Supply
- 5V, 8A
- +12V, 3.5A
- -12V, 0.5A
- RT-85B
- Nelson Audio 16.6” 24 Plug Power Bus Board for Eurorack Modular Synths
