Difference between revisions of "Screwduino"

Revision as of 00:07, 30 December 2019

Arduino UNO Compatible (Arduino bootloader)
ICSP header for program download
Standard 6-pin FTDI connector
4-pin I2C connector
Reset switch
Other than power regulator only uses through-hole parts
5mm pitch screw terminal blocks
Four (4) 4-40 mounting holes with clearance for screw heads, standoffs and/or nuts
7-12V DC on standard 2.1mm DC power connector
Power selection jumper (FTDI, Regulator, Screw Terminals)

Revision as of 00:04, 30 December 2019 (view source) Blwikiadmin (talk \| contribs) ← Older edit		Revision as of 00:07, 30 December 2019 (view source) Blwikiadmin (talk \| contribs) Newer edit →
Line 1:		Line 1:
		+	[[File:tindie-mediums.png\|link=https://www.tindie.com/products/land_boards/arduino-with-screw-terminals-screwduino/]]
		+
	[[File:ScrewduinoX4-5493-1365x663px.jpg]]		[[File:ScrewduinoX4-5493-1365x663px.jpg]]