Difference between revisions of "MHS-5200A DDS Signal Generator"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 22: | Line 22: | ||
[[File:Pwr-Sply-Repl-P17210-720px.jpg]] | [[File:Pwr-Sply-Repl-P17210-720px.jpg]] | ||
| + | |||
| + | * Inside view of rear panel | ||
| + | |||
| + | [[File:Pwr-Sply-Repl-P17212-720px.jpg]] | ||
* Fit AC socket/switch where DC switch was located | * Fit AC socket/switch where DC switch was located | ||
Revision as of 12:16, 4 November 2020
Replace Wall-wart Power Supply
- Wall warts put AC on the ground.
- Fix it by replacing with an AC/DC linear supply
- Diodes backwards on silkscreen/image
Parts
- POWER XFMR 6.3Vct@1.2A 115V CHASSIS MOUNT w/LEADS/F-14X
- LF50ABV Voltage Regulator 5.0V 0.5A Positive
- Won;t work since unit draws 550 mA
- Using 7805
- 3x Aluminum Electrolytic Capacitors - Radial Leaded WCAP-ATG5 1200uF 16V 20% Radial
- 4x 1N5822-T Schottky Diodes & Rectifiers Vr/40V Io/3A T/R
- 2x 5mm terminal blocks
Installation
- Plenty of room inside
- Inside view of rear panel
- Fit AC socket/switch where DC switch was located
Simulation
6.8Vrms = 9.615V peak
Reviews / Fixes
