Difference between revisions of "DigIO16-I2C"

Revision as of 17:42, 1 January 2020

16 bit GPIO
MCP23017 I2C Parallel I/O
- I2C host interface
- 100/400 KHZ operation
- 25mA sink/source capability per I/O
Jumper selectable terminators
3-bit address (Jumper selectable) - Up to 8 boards
I2C Connector
- Daisy-chained 4-pin host interface connector (Ground, Power, Clock, Data)
Power Connector
DB-25 Connector for GPIO lines
24LC024 Personality EEPROM
3.3V or 5V operation
Compatible with Arduino, Raspberry Pi, BeagleBone Black
95x95mm form factor
(4) 6-32 mounting holes - one on each corner

Revision as of 17:42, 1 January 2020 (view source) Blwikiadmin (talk \| contribs) ← Older edit		Revision as of 17:42, 1 January 2020 (view source) Blwikiadmin (talk \| contribs) Newer edit →
Line 1:		Line 1:
−	[[File:tindie-mediums.png\|link=www.tindie.com/products/land_boards/16-channel-digital-io-card-digio16-i2c/]]	+	[[File:tindie-mediums.png\|link=http://www.tindie.com/products/land_boards/16-channel-digital-io-card-digio16-i2c/]]

	[[File:DigIO16-I2C-X3-CCA-5454-640px.jpg]]		[[File:DigIO16-I2C-X3-CCA-5454-640px.jpg]]