Difference between revisions of "DCE"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 22: | Line 22: | ||
* [[FTDI-49MM]] | * [[FTDI-49MM]] | ||
* DCE/[[DTE]] Cards | * DCE/[[DTE]] Cards | ||
| − | ** | + | ** 9 pin connectors plugged together |
* FTDI loopback cable | * FTDI loopback cable | ||
* Run PuTTY | * Run PuTTY | ||
Revision as of 13:00, 18 July 2021
Contents
DCE - RS-232 to TTL
- RS-232 to TTL converter
- The DCE (peripheral) has the female.
H1 Connector
- Pins signal directions are reversed from an FTDI card
- Can be directly wired to FTDI connector
- GND
- CTS (out)
- VCC
- TX (in)
- Rx (out)
- RTS (in)
Test Procedure
- FTDI-49MM
- DCE/DTE Cards
- 9 pin connectors plugged together
- FTDI loopback cable
- Run PuTTY
- 115,200 baud, RTS/CTS
- Type and it comes back
SP232A Application
- SP232ACN-L is 5V part
- ICL3232IBNZ is 3.3V or 5V part
DTE (reference)
- The DTE (PC) has the male connector
