Difference between revisions of "PE4302 RF Attenuator"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 13: | Line 13: | ||
=== Specifications === | === Specifications === | ||
| − | * Power Supply Voltage | + | * Power Supply Voltage |
| − | * Program control gain attenuation range | + | ** 2.7-5.5V DC (typical current 5mA) |
| + | * Program control gain attenuation range | ||
| + | ** 0~31.5DB | ||
* Stepping: 0.5DB | * Stepping: 0.5DB | ||
| − | * Input/Output Impedance | + | * Input/Output Impedance |
| − | * Bandwidth | + | ** 50 ohm |
| − | * | + | * Bandwidth |
| + | ** 1MHz~4GHz(Attenuation value will differ under different frequency) | ||
| + | * Connectors | ||
| + | ** SMA-female | ||
Revision as of 11:29, 29 July 2021
Features
- This is a PE4302 numerical control RF attenuator module.
- The parallel immediate mode is simple and easy to use.
- Bandwidth is wide and can be 1MHz to 4GHz.
- Program control gain attenuation range is from 0 to 31.5DB.
- The module supports parallel port and serial port mode as well as power on state selection function.
Specifications
- Power Supply Voltage
- 2.7-5.5V DC (typical current 5mA)
- Program control gain attenuation range
- 0~31.5DB
- Stepping: 0.5DB
- Input/Output Impedance
- 50 ohm
- Bandwidth
- 1MHz~4GHz(Attenuation value will differ under different frequency)
- Connectors
- SMA-female
