Difference between revisions of "ADE-MIXER"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 25: | Line 25: | ||
* [https://www.qsl.net/g3oou/mixerterminations.html Mixer Diplexer] | * [https://www.qsl.net/g3oou/mixerterminations.html Mixer Diplexer] | ||
| − | * 7 MHz RF | + | * 7 MHz RF, 40 M band |
* 9 MHz IF | * 9 MHz IF | ||
| + | ** SSB or CW [[Crystal Filter Design|Crystal Filter Design]]crystal filter | ||
| + | *** SSB4 | ||
| + | *** CW5 | ||
* 16 MHz LO | * 16 MHz LO | ||
| + | ** Si5351A square wave drive, 50 Ohm source impedance, 1.65V peak | ||
== Specifications == | == Specifications == | ||
Revision as of 01:06, 24 September 2021
Contents
Features
- HF Mixer
- Micro-circuits ADE-1+
- RF Frequency from 0.5 to 500 MHz
- Low conversion loss, 5.0 dB typ.
- Excellent L-R isolation, 55 dB typ.
- Excellent IP3, 15 dBm typ.
- 50 Ohms in and out
- Pi resistor attenuator on LO input (optional)
- BNC or SMA connectors
- 49x49mm
- 4 of 4-40 mounting holes
Kits and Parts ADE-1 Mixer
- 7 MHz RF, 40 M band
- 9 MHz IF
- SSB or CW Crystal Filter Designcrystal filter
- SSB4
- CW5
- SSB or CW Crystal Filter Designcrystal filter
- 16 MHz LO
- Si5351A square wave drive, 50 Ohm source impedance, 1.65V peak
Specifications
ADE-1 Schematic
Performance
Port VWSR
PCB
