Difference between revisions of "ADE-MIXER"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 29: | Line 29: | ||
** SSB or CW [[Crystal Filter Design|Crystal Filter Design]] | ** SSB or CW [[Crystal Filter Design|Crystal Filter Design]] | ||
*** [[Crystal Filter Design#SSB 4 Crystal Filter on Kits and Parts Board|SSB4 Crystal filter]] | *** [[Crystal Filter Design#SSB 4 Crystal Filter on Kits and Parts Board|SSB4 Crystal filter]] | ||
| − | *** CW5 | + | *** [[Crystal_Filter_Design#CW 5 Crystal Filter on Kits and Parts Board|CW5]] |
* 16 MHz LO | * 16 MHz LO | ||
** Si5351A square wave drive, 50 Ohm source impedance, 1.65V peak | ** Si5351A square wave drive, 50 Ohm source impedance, 1.65V peak | ||
Revision as of 01:10, 24 September 2021
Contents
Features
- HF Mixer
- Micro-circuits ADE-1+
- RF Frequency from 0.5 to 500 MHz
- Low conversion loss, 5.0 dB typ.
- Excellent L-R isolation, 55 dB typ.
- Excellent IP3, 15 dBm typ.
- 50 Ohms in and out
- Pi resistor attenuator on LO input (optional)
- BNC or SMA connectors
- 49x49mm
- 4 of 4-40 mounting holes
Kits and Parts ADE-1 Mixer
- 7 MHz RF, 40 M band
- 9 MHz IF
- SSB or CW Crystal Filter Design
- 16 MHz LO
- Si5351A square wave drive, 50 Ohm source impedance, 1.65V peak
Specifications
ADE-1 Schematic
Performance
Port VWSR
PCB
