Difference between revisions of "QCX+ Radio"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (→Videos) |
Blwikiadmin (talk | contribs) (→Build) |
||
| Line 1: | Line 1: | ||
| − | == | + | == Features == |
| + | |||
| + | * [https://www.qrp-labs.com/qcxp.html QCX+ 5W CW transceiver kit] - QRP Labs | ||
| + | |||
| + | * Easy to build, spacious 13 x 10cm main board, separate front panel board with all controls board-mounted | ||
| + | * Professional quality double-sided, through-hole plated, silk-screen printed PCBs | ||
| + | * Choice of single band, 80, 60, 40, 30, 20 or 17m | ||
| + | * Approximately 3-5W CW output (depending on supply voltage) | ||
| + | * 7-16V recommended supply voltage | ||
| + | * Class E power amplifier, transistors are bolted to the PCB as a heatsink, though heat dissipation is minimal | ||
| + | * 7-element Low Pass Filter ensures regulatory compliance | ||
| + | * CW envelope shaping to remove key clicks | ||
| + | * High performance receiver with at least 50dB of unwanted sideband cancellation | ||
| + | * 200Hz CW filter with no ringing | ||
| + | * Si5351A Synthesized VFO with rotary encoder tuning | ||
| + | * 16 x 2 blue backlight LCD screen | ||
| + | * Iambic keyer or straight key option included in the firmware | ||
| + | * Simple Digital Signal Processing assisted CW decoder, displayed real-time on-screen | ||
| + | * On-screen S-meter | ||
| + | * Full or semi QSK operation using fast solid-state transmit/receive switching | ||
| + | * Frequency presets, VFO A/B Split operation, RIT, configurable CW Offset | ||
| + | * Configurable sidetone frequency and volume | ||
| + | * Connectors: 2.1mm power barrel connector, 3.5mm keyer jack, 3.5mm stereo earphone jack, 3.5mm stereo jack for PTT, 3.5mm stereo jack for CAT control, BNC RF output | ||
| + | * Built-in test signal generator and alignment tools to complete simple set-up adjustments | ||
| + | * Built-in test equipment: voltmeter, RF power meter, frequency counter, signal generator | ||
| + | * Beacon mode, supporting automatic CW or WSPR operation | ||
| + | * GPS interface for reference frequency calibration and time-keeping (for WSPR beacon) | ||
| + | * CAT control serial data interface | ||
| + | * Optional 50W PA kit | ||
| + | * Optional Enclosure | ||
| + | * Optional TCXO module | ||
| + | * Optional Dev kit | ||
== Videos == | == Videos == | ||
Revision as of 12:39, 10 October 2021
Features
- QCX+ 5W CW transceiver kit - QRP Labs
- Easy to build, spacious 13 x 10cm main board, separate front panel board with all controls board-mounted
- Professional quality double-sided, through-hole plated, silk-screen printed PCBs
- Choice of single band, 80, 60, 40, 30, 20 or 17m
- Approximately 3-5W CW output (depending on supply voltage)
- 7-16V recommended supply voltage
- Class E power amplifier, transistors are bolted to the PCB as a heatsink, though heat dissipation is minimal
- 7-element Low Pass Filter ensures regulatory compliance
- CW envelope shaping to remove key clicks
- High performance receiver with at least 50dB of unwanted sideband cancellation
- 200Hz CW filter with no ringing
- Si5351A Synthesized VFO with rotary encoder tuning
- 16 x 2 blue backlight LCD screen
- Iambic keyer or straight key option included in the firmware
- Simple Digital Signal Processing assisted CW decoder, displayed real-time on-screen
- On-screen S-meter
- Full or semi QSK operation using fast solid-state transmit/receive switching
- Frequency presets, VFO A/B Split operation, RIT, configurable CW Offset
- Configurable sidetone frequency and volume
- Connectors: 2.1mm power barrel connector, 3.5mm keyer jack, 3.5mm stereo earphone jack, 3.5mm stereo jack for PTT, 3.5mm stereo jack for CAT control, BNC RF output
- Built-in test signal generator and alignment tools to complete simple set-up adjustments
- Built-in test equipment: voltmeter, RF power meter, frequency counter, signal generator
- Beacon mode, supporting automatic CW or WSPR operation
- GPS interface for reference frequency calibration and time-keeping (for WSPR beacon)
- CAT control serial data interface
- Optional 50W PA kit
- Optional Enclosure
- Optional TCXO module
- Optional Dev kit
Videos
- NA5Y Series
