Difference between revisions of "ArduinoInABox"

Revision as of 19:12, 17 October 2021

Arduino Pro Mini
- Inexpensive and widely available
- I/O
  - 14 digital input/output pins (of which 6 can be used as PWM outputs)
  - 6 analog inputs
- On-board resonator
- Reset button
- A six pin header can be connected to an FTDI cable provide USB power and communication to the board
- 3.3 or 5V
- 8 MHz or 16 MHz
- Programmable in Arduino IDE
Detachable Human Interface design (HID)
- OLED
  - 128x32 or 128x64
  - u8x8 driver - 6.2KB overhead
- Rotary Encoder with switch
  - Efficient bounce-less software
- Can leave attached until installing in box
Wide input voltage range
- RF filters on OLED and into board
- Mini360 Switching Mode Power Supply
  - About $1
I/O Boards
- Arduino pins brought to 2x13 header
  - P2-P13, A0-A3
  - A4/A5 or SDA/SCL
- Easily designed
- 3 BNC or SMA connectors
  - Brought to headers
  - DB25 pass-through
Mounts in a standard box

Board is designed to fit into Aluminum Project Box Enclosure DIY 100*76*35mm - ebay search

@@ Line 16: / Line 16: @@
 * Detachable Human Interface design (HID)
 ** OLED
+*** 128x32 or 128x64
+*** [https://github.com/olikraus/u8g2/wiki/u8x8reference u8x8 driver] - 6.2KB overhead
 ** Rotary Encoder with switch
+*** [https://github.com/land-boards/lb-Arduino-Code/blob/master/LBCards/I2C-VFO3/RotaryEncoder.ino Efficient bounce-less software]
 ** Can leave attached until installing in box
 * Wide input voltage range
 ** RF filters on OLED and into board
 ** Mini360 Switching Mode Power Supply
+*** About $1
 * I/O Boards
 ** Arduino pins brought to 2x13 header