IOP16 UART

UART and Baud Rate Generator

UART Programming Interface

• Interface mimics ACIA software interface address/control/status contents
  • ACIA datasheet
• Two addresses, Control/status and data access

Status Register (Read)

• Register Select = 0
• Bits

d0 = RDRF = Receive Data Register Full (1 = data is ready to read)
d1 = TDRE = Transmit Data Register Empty (1 = transmit is ready to send out data)
d2 = DCD  = Data Carrier Detect (0 = carrier present - hardwired)
d3 = CTS  = Clear to Send (0 = Clear to Send - ready to accept data - hardwired)
d7 = IRQ  = Interrupt Request (1 = Interrupt present)

Control Register (Write)

• Register Select = 0
• Bits

d1,d0 = Control (11 = Master Reset)
d6,d5 = TC = Transmitter Control (RTS = Transmitter Interrupt Enable/Disable)
d7    = Interrupt Enable (1=enable interrupts)

Data Register (Read/Write)

• Register Select = 1
  • Read = Read data from the data register (not implemented due to kbd removal)
  • Write = Write data to the data register

Baud Rate Generator for buffered UART

• Assumes 50 MHz clock
• Pass Baud Rate in BAUD_RATE generic as integer value (300, 9600, 115,200)
  • Legal values are 115200, 38400, 19200, 9600, 4800, 2400, 1200, 600, 300
• Call with

BaudRateGen : entity work.BaudRate6850
GENERIC map (
	BAUD_RATE	=>  115200
)
PORT map (
	i_CLOCK_50	=> i_CLOCK_50,
	o_serialEn	=> serialEn
);

UART and Baud Rate Generator VHDL Entities

UART Entity

-- 6850 style UART
UART: entity work.bufferedUART
  port map (
    clk     			=> i_CLOCK_50,
    -- Strobes
    n_wr				=> not w_wrUart,
    n_rd    			=> not w_rdUart,
    -- CPU 
    regSel  			=> w_periphAdr(0),
    dataIn  			=> w_periphOut,
    dataOut 			=> w_UartDataOut,
    -- Clock strobes
    rxClkEn 			=> serialEn,
    txClkEn 			=> serialEn,
   -- Serial I/F
    rxd     			=> rxd1,
    txd     			=> txd1,
    n_rts   			=> rts1,
    n_cts   			=> cts1
  );

Baud Rate Generator Entity

-- ____________________________________________________________________________________
-- Baud Rate Generator as an entity with passed baud rate
-- Legal BAUD_RATE values are 115200, 38400, 19200, 9600, 4800, 2400, 1200, 600, 300
BaudRateGen : entity work.BaudRate6850
  GENERIC map (
    BAUD_RATE	=>  115200
  )
  PORT map (
    i_CLOCK_50	=> i_clk,
    o_serialEn	=> w_serialEn
);

FPGA Resources (EP4CE15)

• UART
• Logic Cells: 154
  • Registers: 93
  • Memory Bits: 128
• Baud Rate Generator
• Logic Cells: 14
  • Registers: 13
  • Memory Bits: 0