Difference between revisions of "SYNTH-MIDI-CTL-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 16: | Line 16: | ||
** Gate | ** Gate | ||
** Clock | ** Clock | ||
| + | * Pot supports setting Clock rate | ||
| + | * Standard EuroRack 6 pin header | ||
| + | ** Supports 12V in with on-board 5V regulator | ||
| + | ** 5V regulator can be not installed if 5V is available on EuroRack connection | ||
| + | * Card is '''not''' a Eurorack card | ||
| + | ** Probably too deep, needs cabling | ||
| + | |||
| + | == Reference Docs == | ||
| + | |||
| + | * [https://learn.adafruit.com/raspberry-pi-pico-led-arcade-button-midi-controller-fighter/coding-the-raspberry-pi-pico-midi-controller MIDI Controller in Python] | ||
| + | * [https://www.behance.net/gallery/113377671/EuroPi-Making-EuroRack-Affordable EuroPi] | ||
Revision as of 08:31, 23 September 2022
Features
- Adapted from HAGIWO's MIDI to CV module
- Translate from Japanese to English using browser
- Controller is XAIO RP2040
- Programmed in CircuitPython
- MIDI In
- Standard MIDI Jacks
- MIDI out jack fir future functionality
- 0-5V Analog CV outs
- MOD
- V/OCT
- Digital Outs
- Gate
- Clock
- Pot supports setting Clock rate
- Standard EuroRack 6 pin header
- Supports 12V in with on-board 5V regulator
- 5V regulator can be not installed if 5V is available on EuroRack connection
- Card is not a Eurorack card
- Probably too deep, needs cabling
