Difference between revisions of "SYNTH-MIDI-CTL-01"

Revision as of 08:43, 23 September 2022

Adapted from HAGIWO's MIDI to CV module
- Translate from Japanese to English using browser
Controller is XAIO RP2040
- Programmed in CircuitPython
MIDI In
- Standard MIDI Jacks
- MIDI out jack fir future functionality
0-5V Analog CV outs
- MOD
- V/OCT
Digital Outs
- Gate
- Clock
Pot supports setting Clock rate
Standard EuroRack 6 pin header
- Supports 12V in with on-board 5V regulator
- 5V regulator can be not installed if 5V is available on EuroRack connection
Card is not a Eurorack card
- Probably too deep, needs cabling

elkayem midi2cv GitHub page _ Nano based project
- Arduino MIDI library has not' yet been ported to Pico so will need to use Python
- Drives 4 CV outputs: Pitch Blend, Control, Note, Velocity
- This card only drives Note (Voltes/Oct, Mod)
MIDI Controller in Python
Principles of Voltage Control
Creative Control Strategies: MIDI to CV
EuroPi
Eurorack Beginners Guide
Eurorack Wiki page
PicoPicoSynth

@@ Line 31: / Line 31: @@
 * [https://learn.adafruit.com/raspberry-pi-pico-led-arcade-button-midi-controller-fighter/coding-the-raspberry-pi-pico-midi-controller MIDI Controller in Python]
 * [https://doepfer.de/a100_man/a100t_e.htm Principles of Voltage Control]
+* [https://www.perfectcircuit.com/signal/midi-to-cv Creative Control Strategies: MIDI to CV]
 * [https://www.behance.net/gallery/113377671/EuroPi-Making-EuroRack-Affordable EuroPi]
 * [https://reverb.com/news/beginners-guide-to-eurorack-case-basics-oscillators-filters Eurorack Beginners Guide]
 * [https://en.wikipedia.org/wiki/Eurorack Eurorack Wiki page]
 * [https://github.com/benevpi/PicoPicoSynth PicoPicoSynth]