Difference between revisions of "SYNTH-MIDI-CTL-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 6: | Line 6: | ||
** Translate from Japanese to English using browser | ** Translate from Japanese to English using browser | ||
* Controller is XAIO RP2040 | * Controller is XAIO RP2040 | ||
| − | ** | + | ** Arduino MIDI library has '''not''' yet been ported to Pico so will need to use CircuitPython |
* MIDI In | * MIDI In | ||
** Standard MIDI Jacks | ** Standard MIDI Jacks | ||
Revision as of 08:54, 23 September 2022
Features
- Adapted from HAGIWO's MIDI to CV module
- Translate from Japanese to English using browser
- Controller is XAIO RP2040
- Arduino MIDI library has not yet been ported to Pico so will need to use CircuitPython
- MIDI In
- Standard MIDI Jacks
- MIDI out jack fir future functionality
- 0-5V Analog CV outs
- MCP4822 12-bit D/A - SPI Interface
- MOD
- V/OCT
- Digital Outs
- Gate
- Clock
- Pot supports setting Clock rate
- Standard EuroRack 6 pin header
- Supports 12V in with on-board 5V regulator
- 5V regulator can be not installed if 5V is available on EuroRack connection
- Card is not a Eurorack card
- Probably too deep, needs cabling
Reference Docs
- elkayem midi2cv GitHub page _ Nano based project
- Arduino MIDI library has not yet been ported to Pico so will need to use Python
- Drives 4 CV outputs: Pitch Blend, Control, Note, Velocity
- This card only drives Note (Voltes/Oct, Mod)
- MIDI Controller in Python
- Principles of Voltage Control
- Creative Control Strategies: MIDI to CV
- EuroPi
- Eurorack Beginners Guide
- Eurorack Wiki page
- PicoPicoSynth
