Difference between revisions of "ER-PROTO-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (Created page with "FILE:ER-PROTO-PANEL-01-SET_FRONT_REAR-3D-720px.png == Features == * Eurorack Prototyping card set * 6 HP wide (30mm) front panel * 3U tall * Three card set ** Board inte...") |
Blwikiadmin (talk | contribs) |
||
| Line 13: | Line 13: | ||
* 4 Jacks | * 4 Jacks | ||
* Tip/sleeve brought to header near middle/bottom | * Tip/sleeve brought to header near middle/bottom | ||
| + | * Pots on top, jacks on bottom | ||
| + | ** Easier to adjust pots without bumping into pots | ||
| + | ** Pots more often accessed than jacks | ||
* Large prototyping area | * Large prototyping area | ||
* +12V, -12V down board edges | * +12V, -12V down board edges | ||
Revision as of 12:12, 25 October 2022
Features
- Eurorack Prototyping card set
- 6 HP wide (30mm) front panel
- 3U tall
- Three card set
- Board interconnect headers duplicated on headers
- 6 POTS
- Series resistors on pot wiper
- All 3 pot pins brought to top header
- 4 Jacks
- Tip/sleeve brought to header near middle/bottom
- Pots on top, jacks on bottom
- Easier to adjust pots without bumping into pots
- Pots more often accessed than jacks
- Large prototyping area
- +12V, -12V down board edges
- 5V/GND down center of card
- Bussed connections horizontally
- Front Panel with generic labels
- Cover with White on Black P-Touch labels
Example
- Arduino NANO with quad Opamp example
