Difference between revisions of "ER-PROTO-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 9: | Line 9: | ||
** Board interconnect headers duplicated on headers | ** Board interconnect headers duplicated on headers | ||
* 6 POTS | * 6 POTS | ||
| + | ** Marked as RV1-RV5 | ||
** Series resistors on pot wiper | ** Series resistors on pot wiper | ||
** All 3 pot pins brought to top header | ** All 3 pot pins brought to top header | ||
* 4 Jacks | * 4 Jacks | ||
| − | * Tip/sleeve brought to header near middle/bottom | + | ** Marked J1-J4 |
| − | * Pots on top, jacks on bottom | + | ** Tip/sleeve brought to header near middle/bottom |
| + | * Pots on top, jacks on bottom of card | ||
** Easier to adjust pots without bumping into pots | ** Easier to adjust pots without bumping into pots | ||
** Pots more often accessed than jacks | ** Pots more often accessed than jacks | ||
Revision as of 12:21, 25 October 2022
Features
- Eurorack Prototyping card set
- 6 HP wide (30mm) front panel
- 3U tall
- Three card set
- Board interconnect headers duplicated on headers
- 6 POTS
- Marked as RV1-RV5
- Series resistors on pot wiper
- All 3 pot pins brought to top header
- 4 Jacks
- Marked J1-J4
- Tip/sleeve brought to header near middle/bottom
- Pots on top, jacks on bottom of card
- Easier to adjust pots without bumping into pots
- Pots more often accessed than jacks
- Large prototyping area
- 58 nodes with 3 holes per node (29 per "side")
- +12V, -12V down board edges
- 5V/GND down center of card
- Bussed connections horizontally
- Front Panel with generic labels
- Cover with White on Black P-Touch labels
Example
- Arduino NANO with quad Opamp example
