ER-MIDI-CV4-02

Features

• Eurorack 6HP, 3U module
• Adapted from HAGIWO's MIDI to CV module
  • Translate from Japanese to English using browser
  • Removes Digital Outputs
  • Has 4 Analog Outputs instead of 2
• Based also on SYNTH-MIDI-CV4-01
• Arduino Pro Mini
  • 16 MHz
  • 5V
• MIDI In
  • TRS Type A jack MIDI In
  • USB MIDI In
• (4) 0-5V Analog CV outs
  • MCP4822 12-bit D/A - SPI Interface
    • MCP4822 Datasheet
• GATE output
• CLK output
• Standard EuroRack 16 pin power header

Arduino Pins

• Analog 1 - Speed Adjust POT
• A4 = SDA
• A5 = SCL
• D8 = LDAC1* to CV_1, CV2
• D9 = LDAC2* to CV_3, CV_4
• D13 = SPI CSK to both ADCs
• D11 = SPI MOSI to both ADCs
• D10 = SLAVE SELECT to both ADCs

Connectors

J1 - Eurorack Power

• 2x5 IDC connector
• Only uses +12V (and GND)
• Diode protected

J2 - CVs, GATE, CLK (to/from Controls card)

• J12 on Controls card
• Pinout

1. VCC (+5V)
2. GATE
3. CV4
4. CV2
5. POT
6. CV1
7. CV3
8. CLK
9. N/C
10. GND

J3 - I2C

• Pinout

1. SCL
2. SDA
3. VCC (+5V)
4. GND

J4 - MIDI (to/from Controls card)

• J9 on Controls card
• Pinout

1. VCC (+5V)
2. MIDI Out
3. MIDI In
4. GND

J5 - MIDI into RX

• Remove to use MIDI from Controls card

Application

• Use with ER-VCO-03 to control pitch and Mod
  • CV_1 = V/OCT
  • CV_2 = MOD
• Use with ER-VCA2-01 to control amplitude

Assembly Sheet

• ER-MIDI-CV4-02 Rev 1 Assembly Sheet