Difference between revisions of "ER-SCOPE-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 18: | Line 18: | ||
=== On Controls card === | === On Controls card === | ||
| + | |||
| + | * Wire top pin of R7 to top pin of R17 (connects J5 to J6 tip) | ||
| + | * SW1 goes in cutout at J1 | ||
| + | * R7 stands up at bottom of R7 and wires to SW1 center | ||
| + | * 4.7uF cap from J6 tip to SW1 top | ||
| + | ** + side of cap to J6 | ||
| + | ** - side of cap to SW1 top | ||
| + | * Wire from J5 tip to SW1 bottom | ||
[[file:ER-SCOPE-01_J7_JACKS_ON_CTRLS.PNG]] | [[file:ER-SCOPE-01_J7_JACKS_ON_CTRLS.PNG]] | ||
Revision as of 08:51, 7 January 2023
Features
- HAGIWO design
- OLED : 128*64 pixel 0.96inch
- Knob1: Rotary encoder for selection (including push sw)
- Knob2: GAIN
- Toggle SW : AC/DC switching
- TRIG IN : External trigger IN
- Input : Signal to be observed IN
- Observable voltage is 5 V p-p
- Output : Observable signal OUT (short circuit with INPUT)
HAGIWO Schematic
Design
On Controls card
- Wire top pin of R7 to top pin of R17 (connects J5 to J6 tip)
- SW1 goes in cutout at J1
- R7 stands up at bottom of R7 and wires to SW1 center
- 4.7uF cap from J6 tip to SW1 top
- + side of cap to J6
- - side of cap to SW1 top
- Wire from J5 tip to SW1 bottom
On Daughterboard
- CPU
- Pots connections
- Jacks connections:ER-SCOPE
- Power
