Difference between revisions of "TinyGrid85"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 27: | Line 27: | ||
=== H2 - ISP Connector === | === H2 - ISP Connector === | ||
| + | |||
| + | * [https://www.arduino.cc/en/Tutorial/ArduinoISP#toc3 Program using an Arduino UNO running ArduinoISP]. | ||
[[File:Tiny85-ISP-Conn.PNG]] | [[File:Tiny85-ISP-Conn.PNG]] | ||
| − | |||
| − | |||
[[File:ATtiny45-85.png]] | [[File:ATtiny45-85.png]] | ||
Revision as of 12:05, 27 January 2020
Features
- ATMEL ATTiny85 Microprocessor (or compatible 8-pin part)
- Arduino Compatible (works with Arduino bootloader and Arduino IDE)
- Prototyping area with power/ground connections
- Brings out all 5 I/O and reset lines to grid columns
- Laid out like a breadboard with vertically connected traces.
- Power and Ground horizontal connections though all columns
- Labeled (with letters/numbers) for easy documentation
- H1 - Install jumper to select regulator or remove for ISP +5V
- H2 - 6-pin ISP Download Header
- 5V Power Regulator with generous area under the regulator for heat dissipation
- 2.1mm Connector for AC/DC adapter 7-9V input
- (4) 4-40 or M3 screw holes for solid mounting
- 49x49 mm board
Connectors
H1 - VREG Jumper
- Install to power board from the on-board regulator
- Remove when connecting powered ISP cable
H2 - ISP Connector
