Difference between revisions of "BBB-GVS-3"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 1: | Line 1: | ||
[[File:tindie-mediums.png|link=https://www.tindie.com/products/land_boards/beaglebone-sensor-connection-cape-bbb-gvs-3/]] | [[File:tindie-mediums.png|link=https://www.tindie.com/products/land_boards/beaglebone-sensor-connection-cape-bbb-gvs-3/]] | ||
| + | |||
| + | <video type="youtube">AWGak9Ixfpo</video> | ||
[[File:BBB-GVS-3_6135-640px.jpg]] | [[File:BBB-GVS-3_6135-640px.jpg]] | ||
Revision as of 02:47, 30 December 2019
Features
- (19) GPIOs, GVS pins
- (3) UARTs, GVTxRx pins
- (1) I2C bus, GVSdaSck
- (8) Channels of 3.3V to 5V level translators
- Use female to female jumpers to route the GPIO lines to the translator channels
- 5V side has GVS pins
- (7) 1.8V analog GVS connections with analog voltage/ground
- Buffer opamps on the analog inputs
- 5V pins are all ESD protected pins with 15 kV of protection
- Selectable 5V source (SYS_5V or VDD_5V)
- Cape configuration EEPROM with write enable jumper
- Beaglebone Black form factor
