Difference between revisions of "RPI PSOC5"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 18: | Line 18: | ||
** H3 - Voltage Select Jumper | ** H3 - Voltage Select Jumper | ||
* On-board LED | * On-board LED | ||
+ | |||
+ | == Connectors == | ||
+ | |||
+ | === H4 - 3.3V GPIO connector=== | ||
+ | |||
+ | # 3.3V | ||
+ | # 3.3V | ||
+ | # 15.0 | ||
+ | # 15.1 | ||
+ | # 3.0 | ||
+ | # 3.1 | ||
+ | # 3.2 | ||
+ | # 3.3 | ||
+ | # 3.4 | ||
+ | # 3.5 | ||
+ | # 3.6 | ||
+ | # 3.7 | ||
+ | # 15.2 | ||
+ | # 15.3 | ||
+ | # GND | ||
+ | # GND | ||
+ | |||
+ | === H5 = 3.3V or 5V GPIO connector === | ||
+ | |||
+ | # VZ0 | ||
+ | # VZ0 | ||
+ | # 4.5 | ||
+ | # 4.4 | ||
+ | # 4.3 | ||
+ | # 4.2 | ||
+ | # 0.7 | ||
+ | # 0.6 | ||
+ | # 0.5 | ||
+ | # 0.4 | ||
+ | # 0.3 | ||
+ | # 0.2 | ||
+ | # 0.1 | ||
+ | # 0.0 | ||
+ | # 4.1 | ||
+ | # 4.0 | ||
+ | # 12.3 | ||
+ | # 12.2 | ||
+ | # GND | ||
+ | # GND | ||
== Drivers/Source Code == | == Drivers/Source Code == | ||
== Assembly Sheet == | == Assembly Sheet == |
Revision as of 23:03, 30 December 2019
Contents
Raspberry Pi Clone
Features
- Raspberry Pi Compatible
- 40 pin GPIO connector
- Connects to all GPIO pins of the Raspberry Pi
- Programmable System on a Chip (PSoC)
- Cypress Semiconductor
- USB Micro connector
- Placed in the same location as a Raspberry Pi
- Provides 5V power
- 5V power is polyfuse protected
- 3.3V regulator
- 3.3V or 5V I/O
- H3 - Voltage Select Jumper
- On-board LED
Connectors
H4 - 3.3V GPIO connector
- 3.3V
- 3.3V
- 15.0
- 15.1
- 3.0
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 15.2
- 15.3
- GND
- GND
H5 = 3.3V or 5V GPIO connector
- VZ0
- VZ0
- 4.5
- 4.4
- 4.3
- 4.2
- 0.7
- 0.6
- 0.5
- 0.4
- 0.3
- 0.2
- 0.1
- 0.0
- 4.1
- 4.0
- 12.3
- 12.2
- GND
- GND