Difference between revisions of "FTDI-49MM"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 3: | Line 3: | ||
== Features == | == Features == | ||
| − | * FTDI FT230X | + | * FTDI [https://www.ftdichip.com/Products/ICs/FT230X.html FT230X] USB-to-FTDI Serial |
* USB B connector (not micro or mini, but the beefy USB B connector) | * USB B connector (not micro or mini, but the beefy USB B connector) | ||
* FTDI compatible pinout | * FTDI compatible pinout | ||
Revision as of 11:07, 2 October 2020
Features
- FTDI FT230X USB-to-FTDI Serial
- USB B connector (not micro or mini, but the beefy USB B connector)
- FTDI compatible pinout
- 3.3V or 5V selection jumper
- Header for 5V power distribution
- Rx and Tx LEDs
- (4) 4-40 mounting holes
- Mounts to 95mm to 45mm adapter
- Stacks up with standoffs for use with other 95mm cards
Stackup with EP2 FPGA card
- Top to bottom of stackup
- EP2C5-DB
- Cyclone_II_EP2C5_Mini_Dev_Board Card
- FTDI-49MM - (this card)
- CARRIER95TO49MM
Pinout
- GND
- CTS* (in)
- VCC
- TX (out)
- RX (in)
- RTS* (out)
