Difference between revisions of "I2CIO-8"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 20: | Line 20: | ||
* 49x49mm form factor | * 49x49mm form factor | ||
* (4) #4-40 mounting holes | * (4) #4-40 mounting holes | ||
| − | |||
== Drivers/Example Code == | == Drivers/Example Code == | ||
| + | |||
| + | Extensive Driver Support for Arduino, Raspberry Pi, MicroPython, ESP-32, Blue Pill Board, Cypress PSoC | ||
* [https://github.com/land-boards/lb-Arduino-Code/tree/master/libraries/LandBoards_I2CIO8 Github repo] - Arduino Driver code | * [https://github.com/land-boards/lb-Arduino-Code/tree/master/libraries/LandBoards_I2CIO8 Github repo] - Arduino Driver code | ||
Revision as of 14:10, 31 December 2019
Features
- 8 bits of Digital I/O
- I2C interface
- MCP23008 - 8-Bit I/O Expander with I2C Interface
- Base address = 0x20
- Address offset jumpers (0-7)
- Interrupt pin on I2C connectors
- Interrupt LED
- I2C Daisy-chain connectors
- 4 input (or output) jumpers
- 4 LEDs
- 2.7V to 5.5V
- 49x49mm form factor
- (4) #4-40 mounting holes
Drivers/Example Code
Extensive Driver Support for Arduino, Raspberry Pi, MicroPython, ESP-32, Blue Pill Board, Cypress PSoC
- Github repo - Arduino Driver code
- Github repo - Arduino Example code
- Github repo - MicroPython Driver
