Difference between revisions of "Frequency Calibration via GPS"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (Created page with "* NEO-7M GPS * FTDI-49MM * Pulse Generator modified to provide 50 Ohms, 5V drive") |
Blwikiadmin (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | * NEO-7M GPS | + | * NEO-7M GPS Module |
| + | ** U-Center Programming Software | ||
| + | ** Set to 8 MHz on PPS pin | ||
* [[FTDI-49MM]] | * [[FTDI-49MM]] | ||
| + | ** Used to program the GPS module | ||
* [[PulseGen|Pulse Generator]] modified to provide 50 Ohms, 5V drive | * [[PulseGen|Pulse Generator]] modified to provide 50 Ohms, 5V drive | ||
Revision as of 17:54, 27 November 2020
- NEO-7M GPS Module
- U-Center Programming Software
- Set to 8 MHz on PPS pin
- FTDI-49MM
- Used to program the GPS module
- Pulse Generator modified to provide 50 Ohms, 5V drive
