Difference between revisions of "Frequency Calibration via GPS"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 2: | Line 2: | ||
** U-Center Programming Software | ** U-Center Programming Software | ||
** Set to 8 MHz on PPS pin | ** Set to 8 MHz on PPS pin | ||
| + | ** SMA Female connector | ||
| + | * Remote Amplified GPS Antenna | ||
| + | ** SMA Male connector | ||
* [[FTDI-49MM]] | * [[FTDI-49MM]] | ||
** Used to program the GPS module | ** Used to program the GPS module | ||
* [[PulseGen|Pulse Generator]] modified to provide 50 Ohms, 5V drive | * [[PulseGen|Pulse Generator]] modified to provide 50 Ohms, 5V drive | ||
Revision as of 17:55, 27 November 2020
- NEO-7M GPS Module
- U-Center Programming Software
- Set to 8 MHz on PPS pin
- SMA Female connector
- Remote Amplified GPS Antenna
- SMA Male connector
- FTDI-49MM
- Used to program the GPS module
- Pulse Generator modified to provide 50 Ohms, 5V drive
