Difference between revisions of "Arduino Based Test Station"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 5: | Line 5: | ||
== Cards Tested == | == Cards Tested == | ||
| + | <pre> | ||
| + | Select the board type | ||
| + | 1 - DIGIO16-I2C board | ||
| + | 2 - DIGIO-128 board | ||
| + | 3 - OptoIn8-I2C board | ||
| + | 4 - OptoOut8-I2C board | ||
| + | 5 - DIGIO32-I2C board | ||
| + | 6 - PROTO16-I2C board | ||
| + | 7 - ODAS-PSOC5 board | ||
| + | 8 - ODAS-RELAY16 board | ||
| + | A - DIGIO-128/64 board | ||
| + | 9 - TBD board | ||
| + | X - Boards without EEPROMs | ||
| + | Select board > X | ||
| + | Select the board type | ||
| + | 1 - I2CIO8 board | ||
| + | 2 - I2CIO8X board | ||
| + | 3 - SWLEDX8-I2C board | ||
| + | 4 - OPTOFast/Small Non-Inverting board | ||
| + | 5 - OPTOFast/Small Inverting board | ||
| + | 6 - I2C-RPT-01 board | ||
| + | 7 - OptoFastBi board | ||
| + | </pre> | ||
== Cable Sets == | == Cable Sets == | ||
Revision as of 12:54, 1 January 2020
Contents
Hardware
- Blue Pill Hub
- NANO-BKOUT (alternate)
Cards Tested
Select the board type 1 - DIGIO16-I2C board 2 - DIGIO-128 board 3 - OptoIn8-I2C board 4 - OptoOut8-I2C board 5 - DIGIO32-I2C board 6 - PROTO16-I2C board 7 - ODAS-PSOC5 board 8 - ODAS-RELAY16 board A - DIGIO-128/64 board 9 - TBD board X - Boards without EEPROMs Select board > X Select the board type 1 - I2CIO8 board 2 - I2CIO8X board 3 - SWLEDX8-I2C board 4 - OPTOFast/Small Non-Inverting board 5 - OPTOFast/Small Inverting board 6 - I2C-RPT-01 board 7 - OptoFastBi board
Cable Sets
- Particular cable sets for cards
