Difference between revisions of "Front Panel Assembly Sheet Rev 1"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) (→Notes) |
||
Line 59: | Line 59: | ||
* Note 2 - R34 and R35 are 2.2K I2C terminators. Needed for 3.3V operation and 400 KHz operation. R36 is INT* pullup. | * Note 2 - R34 and R35 are 2.2K I2C terminators. Needed for 3.3V operation and 400 KHz operation. R36 is INT* pullup. | ||
* Note 3 - LEDs - I like [https://www.ebay.com/itm/381087033256 diffused Orange LEDs]. I don't like clear LEDs. | * Note 3 - LEDs - I like [https://www.ebay.com/itm/381087033256 diffused Orange LEDs]. I don't like clear LEDs. | ||
+ | * Note 4 - Pick the height you like. I like [https://www.ebay.com/itm/402850517873 6mm high]. |
Revision as of 15:40, 20 June 2021
Parts List / Assembly Order
Qty | Value | RefDes | Qty | Value | RefDes | |
---|---|---|---|---|---|---|
4 | 10K, 1/4W (Rear) | R33, R36-R38 | 32 | LED, 5mm (NOTE 3) (Front) | DS0-DS31 | |
32 | 1K, 1/4W (NOTE 1) (Rear) | R1-R32 | 1 | HEADER, RT ANG, 1x2 (Rear) | J1 | |
3 | 2.2K, 1/4W (NOTE 2) (Rear) | R34-R36 | 1 | HEADER, RT ANG, 1x5 (Rear) | J2 | |
32 | SW_Push, 6mm (Note 4) (Front) | SW0-SW31 | 1 | HEADER, RT ANG, 1X4 (Rear) | J3 | |
4 | MCP23017-E/SS (Front) | U1-U4 | 1 | HEADER, RT ANG, 2X2 (Rear) | J4 |
Notes
- Note 1 - 1K ballast LED resistors. Pick value for how bright you want LEDs at operating voltage.
- Note 2 - R34 and R35 are 2.2K I2C terminators. Needed for 3.3V operation and 400 KHz operation. R36 is INT* pullup.
- Note 3 - LEDs - I like diffused Orange LEDs. I don't like clear LEDs.
- Note 4 - Pick the height you like. I like 6mm high.