Difference between revisions of "DCE"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 10: | Line 10: | ||
* Pins signal directions are reversed from an FTDI card | * Pins signal directions are reversed from an FTDI card | ||
** Can be directly wired to FTDI connector | ** Can be directly wired to FTDI connector | ||
+ | |||
+ | === Pinout === | ||
# GND | # GND |
Revision as of 13:03, 18 July 2021
Contents
DCE - RS-232 to TTL
- RS-232 to TTL converter
- The DCE (peripheral) has the female.
H1 Connector
- Pins signal directions are reversed from an FTDI card
- Can be directly wired to FTDI connector
Pinout
- GND
- CTS (out)
- VCC (3.3V or 5V)
- TX (in)
- Rx (out)
- RTS (in)
Test Procedure
- FTDI-49MM
- DCE/DTE Cards
- 9 pin connectors plugged together
- FTDI loopback cable
- Run PuTTY
- 115,200 baud, RTS/CTS
- Type and it comes back
SP232A Application
- SP232ACN-L is 5V part
- ICL3232IBNZ is 3.3V or 5V part
DTE (reference)
- The DTE (PC) has the male connector