Difference between revisions of "PE4302 RF Attenuator"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (Created page with "File:RF_Atten-Front-01.jpg File:RF_Atten-Rear-01.jpg") |
Blwikiadmin (talk | contribs) |
||
| Line 2: | Line 2: | ||
[[File:RF_Atten-Rear-01.jpg]] | [[File:RF_Atten-Rear-01.jpg]] | ||
| + | |||
| + | == Features == | ||
| + | |||
| + | * This is a PE4302 numerical control RF attenuator module. | ||
| + | * The parallel immediate mode is simple and easy to use. | ||
| + | * Bandwidth is wide and can be 1MHz to 4GHz. | ||
| + | * Program control gain attenuation range is from 0 to 31.5DB. | ||
| + | * The module supports parallel port and serial port mode as well as power on state selection function. | ||
| + | |||
| + | == Specifications == | ||
| + | |||
| + | * Power Supply Voltage: 5V DC (typical current 5mA) | ||
| + | * Program control gain attenuation range: 0~31.5DB | ||
| + | * Stepping: 0.5DB | ||
| + | * Input/Output Impedance: 50ohm | ||
| + | * Bandwidth: 1MHz~4GHz(Attenuation value will differ under different frequency) | ||
| + | * Connector: SMA-female | ||
Revision as of 11:21, 29 July 2021
Features
- This is a PE4302 numerical control RF attenuator module.
- The parallel immediate mode is simple and easy to use.
- Bandwidth is wide and can be 1MHz to 4GHz.
- Program control gain attenuation range is from 0 to 31.5DB.
- The module supports parallel port and serial port mode as well as power on state selection function.
Specifications
- Power Supply Voltage: 5V DC (typical current 5mA)
- Program control gain attenuation range: 0~31.5DB
- Stepping: 0.5DB
- Input/Output Impedance: 50ohm
- Bandwidth: 1MHz~4GHz(Attenuation value will differ under different frequency)
- Connector: SMA-female
