Difference between revisions of "VFO-003"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
|||
| Line 33: | Line 33: | ||
== Connectors == | == Connectors == | ||
| + | |||
| + | === J1 - OLED === | ||
[[file:VFO-003_J1.PNG]] | [[file:VFO-003_J1.PNG]] | ||
| + | |||
| + | === J2 - Display Encoder/OLED (Display card) === | ||
[[file:VFO-003_J2.PNG]] | [[file:VFO-003_J2.PNG]] | ||
| + | |||
| + | === J3 - Display Encoder/OLED (Main card) === | ||
[[file:VFO-003_J3.PNG]] | [[file:VFO-003_J3.PNG]] | ||
| + | |||
| + | === J4 -- FTDI === | ||
[[file:VFO-003_J4.PNG]] | [[file:VFO-003_J4.PNG]] | ||
| + | |||
| + | === J5 - Arduino A0-A3/C10-D13 === | ||
[[file:VFO-003_J5.PNG]] | [[file:VFO-003_J5.PNG]] | ||
| + | |||
| + | === J6 - Disconnect for Mini-360 Power Supply === | ||
[[file:VFO-003_J6.PNG]] | [[file:VFO-003_J6.PNG]] | ||
| + | |||
| + | === J7 - Output disconnects === | ||
| + | |||
| + | * Cut rear side trace to disconnect | ||
[[file:VFO-003_J7.PNG]] | [[file:VFO-003_J7.PNG]] | ||
| + | |||
| + | === J7 - Arduino P5-P9 === | ||
[[file:VFO-003_J8.PNG]] | [[file:VFO-003_J8.PNG]] | ||
Revision as of 15:01, 29 July 2021
Features
- Software controlled VFO
- Arduino Pro Mini Microprocessor
- 8-bit ATMEGA328 CPU
- 8 MHz
- 3.3V I/O
- Detachable Rotary Encoder/OLED card
- SSD1306 OLED Display
- I2C Interface
- Controls frequencies with rotary encoder
- 100 Hz, 1 KHz, 10 KHz, 100 KHz, 1 MHz, 10 MHz steps (software controllable
- SSD1306 OLED Display
- Si5351A Oscillator
- 3 Outputs
- 25 or 27 MHz crystal
- I2C Interface
- Power
- MINI-360 DC/DC Buck regulator
- 7-24 VDC
- Fits in standard extruded enclosures
Arduino Pro Mini
Schematic
Connectors
J1 - OLED
J2 - Display Encoder/OLED (Display card)
J3 - Display Encoder/OLED (Main card)
J4 -- FTDI
J5 - Arduino A0-A3/C10-D13
J6 - Disconnect for Mini-360 Power Supply
J7 - Output disconnects
- Cut rear side trace to disconnect
J7 - Arduino P5-P9
