Extend IOP16 minimal example

Overview

• This is a guide to extending the minimal IOP example by adding IOP16 Peripherals to the minimal design
• This is not the same as Embedding the IOP16 into another design
• This guide requires general familiarity with IOP16 16-bit I/O CPU Design

Clone Sources

Clone the two repositories to the same directory level since relative paths are used for source files

• IOP16 GitHub repository
• Design a CPU GitHub repository

Build Minimal Example

• Start by building the minimal example in Quartus II
  • Adjust I/O pins as required for the FPGA that is being used
    • This example does not cover porting to a different FPGA card
  • May need to re-point to the ROM .MIF file since Quartus II sometimes "forgets"

Steps

• Copy baseline design
• Select/add peripherals
• Create new peripherals
• Write assembly code

Baseline Design

• Starts from IOP example
  • Similar to Arduino "Blink Sketch" and uses the resources
    • Timer Unit 0 1 second timer
    • On-board LED
  • The Timer unit could be removed if desired
    • Timer makes Blink easier
• Copy the minimal design to a new folder