SWLEDX8

From Land Boards Wiki
Revision as of 18:35, 3 June 2022 by Blwikiadmin (talk | contribs)
Jump to navigation Jump to search

File:SWLEDX8-I2C-P119-Orth-720px.jpg

Features

This card provides a very easy way to mount switches and/or LEDs in an enclosure.

  • (8) LEDs
  • (8) Slide Switches
  • 2x10 pin connector
    • 0.1" pitch connector
  • 59mmx38mm
  • (4) #4-40 mounting holes
  • Optional part of a two-card system with SWLEDX8-I2C

Build Options

  • P1 header can be in installed on the front or rear of the car
  • P1 header can be right angle or straight

P1 right angle mounted on rear

SWLEDX8 Rev2 Front (Right) 3D.png

SWLEDX8 Rev2 Rear (Right) 3D.png

P1 straight mounted on rear

  • Useful when stacked above SWLEDX8-I2C card
    • Only need 1 header if soldering directly to both boards

SWLEDX8 Rev2 Front (Straight) 3D.png

SWLEDX8 Rev2 Straight 3D.png

Connector

  • Connector can be mounted on the rear side of the card to connect to SWLEDX8-I2C
  • S0-S7 - Switches
  • L0-L7 = LEDs

SWLEDX8 J1.PNG

Mechanicals

SW8LED-Rev2 MECHS.png

Example Applications

The corner mounting holes make the card easy to use. Here's some applications using the card.

Z80-MBC2 - LEDs Application

SWLEDX8 Application Z80-MBC2.PNG

MultiComp in a Box - Switches Application

SWLEDX8 Application MultiCompInABox.PNG

Assembly Sheet

Retrieved from "http://land-boards.com/blwiki/index.php?title=SWLEDX8&oldid=16297"