ER-STIX

Features

Similar to Mutable Instruments Branches
- Dual Bernoulli Gate
Differences vs Branches
- Only has 1 GATE input
- No push buttons
- 0-5V input/outputs
Built on ER-PROTO-02
Arduino Pro Mini
Protection on all external jacks with Schottky diode clamps
10-pin Eurorack power
- Uses +12V only

Operation

Receives single Gate on J1
RV1 controls OUT 1
RV2 controls OUT 2
RV3 is mode for OUT 1
RV4 is mode for OUT 2

Arduino Pro Mini

Works with ATMega168 (or 328)
Program from FTDI

Arduino Pins

Controls

RV1 - Probabilistic ratio for Output 1
- Center = 50-50, CCW = Out1A on 100%, CW = 0% on OUT1B
- Inserting J3 jack disables RV1
RV2 - Probabilistic ratio for Output 2
- Center = 50-50, CCW = Out1A on 100%, CW = 0% on OUT1B
- Inserting J3 jack disables RV1
RV3 - OUT 1 Mode
- 7-12 o'clock = Normal Mode drives only OUT1A or OUT1B
- 12-5 o'clock = Drives both OUT1A and OUT1B
RV4 - OUT 2 Mode
- 7-12 o'clock = Normal Mode drives only OU21A or OUT2B
- 12-5 o'clock = Drives both OUT2A and OUT2B

Jacks

J1 - Gate

0.6V threshold GATE input

J2 - OUT1 Random %

0-5V control input
Inserting jack disables RV1
0V = 100% on OUT1A, 2.5V = 50% on OUT1A/OUT1B, 5V = 100% on OUT1B

J3 - Out1A

Gate output 1
0-5V digital output

J4 - Out1B

Gate output 1
0-5V digital output

J5 - Out2A

Gate output 2
0-5V digital output

J6 - Out2B

Gate output 2
0-5V digital output

Schematic

Schematic

Software

Arduino IDE

Pot/GATEs Test

Pot/GATEs Test code GitHub
Used for testing the hardware works
Reads (4) pots and prints values to monitor, write values to serial
Toggles GATE outs - one at a time
Tests RV1/J2 loopback

Simplest Version 1

Simplest Version 1 code GitHub
2 pots, one for OUT1A/B, other for OUT2A/2B

Still pretty simple - Version 2

Still pretty simple - Version 2 code GitHub
- Adds (2) mode control knobs
- 7 o-clock = 12 o'clock = Normal mode
- 12 o-clock - 5 o=clock = Send Outputs on both OUTxA and OUTxB
Measured GATE in to OUT latency < 20uS using digitalRead and digitalWrite
- Improved by accessing the ports directly
  - Measured at 2 uS

Sketch uses 1990 bytes (13%) of program storage space. Maximum is 14336 bytes.
Global variables use 13 bytes (1%) of dynamic memory, leaving 1011 bytes for local variables. Maximum is 1024 bytes.

More modes - Version 3

More modes - Version 3 code GitHub
- Modes set by RV3, RV4

Modes	RV3	Dependency	RV4	Dependency	Operation
000	7-12	OUT1/OUT2 independent	7-9	OUT1/OUT2 independent	Normal, coin toss one of OUTxA, OUTxB
001	7-12	OUT1/OUT2 independent	9-12	OUT1/OUT2 independent	Coin toss determines OUTxA, OUTxB independently
010	7-12	OUT1/OUT2 independent	12-3	OUT1/OUT2 independent	Ping pong A/B
011	7-12	OUT1/OUT2 independent	3-5	OUT1/OUT2 independent	Coin toss both on
100	12-5	OUT1/OUT2 dependent	7-9	OUT1/OUT2 dependent	Normal, coin toss one of OUT1A, OUT1B, OUT2A, OUT2B
101	12-5	OUT1/OUT2 dependent	9-12	OUT1/OUT2 dependent	Coin toss determines OUTxA, OUTxB dependently
110	12-5	OUT1/OUT2 dependent	12-3	OUT1/OUT2 dependent	Sequential OUT1A, OUT1B, OUT2A, OUT2B
111	12-5	OUT1/OUT2 dependent	3-5	OUT1/OUT2 dependent	All on

Build

Built on ER-PROTO-02

Build Pictures

Covered RV5, RV6 holes with black duct tape
Labels are White on Black P-Touch labels

Nets

  (nets
    (net (code "1") (name "+5V")
      (node (ref "D3") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "D5") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "J28") (pin "1") (pinfunction "VCC") (pintype "power_in"))
      (node (ref "RVX1") (pin "1") (pinfunction "1") (pintype "passive"))
      (node (ref "RVX2") (pin "1") (pinfunction "1") (pintype "passive"))
      (node (ref "RVX3") (pin "1") (pinfunction "1") (pintype "passive"))
      (node (ref "RVX4") (pin "1") (pinfunction "1") (pintype "passive"))
      (node (ref "U1") (pin "22") (pinfunction "Vcc2") (pintype "unspecified")))
    (net (code "2") (name "+12V")
      (node (ref "C1") (pin "1") (pintype "passive"))
      (node (ref "D1") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "U1") (pin "19") (pinfunction "RAW") (pintype "unspecified")))
    (net (code "3") (name "GATE")
      (node (ref "D2") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "D5") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "J29") (pin "10") (pinfunction "J1_T") (pintype "passive"))
      (node (ref "Q1") (pin "2") (pinfunction "B") (pintype "passive"))
      (node (ref "RX11") (pin "1") (pintype "passive")))
    (net (code "4") (name "GND")
      (node (ref "C1") (pin "2") (pintype "passive"))
      (node (ref "D11") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "D13") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "D2") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "D4") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "D7") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "D9") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "J28") (pin "20") (pinfunction "GND") (pintype "power_in"))
      (node (ref "J29") (pin "1") (pinfunction "GND") (pintype "power_in"))
      (node (ref "J29") (pin "15") (pinfunction "GND") (pintype "power_in"))
      (node (ref "J29") (pin "16") (pinfunction "GND") (pintype "power_in"))
      (node (ref "J29") (pin "2") (pinfunction "GND") (pintype "power_in"))
      (node (ref "J9") (pin "3") (pinfunction "Pin_3") (pintype "passive"))
      (node (ref "J9") (pin "4") (pinfunction "Pin_4") (pintype "passive"))
      (node (ref "J9") (pin "5") (pinfunction "Pin_5") (pintype "passive"))
      (node (ref "J9") (pin "6") (pinfunction "Pin_6") (pintype "passive"))
      (node (ref "J9") (pin "7") (pinfunction "Pin_7") (pintype "passive"))
      (node (ref "J9") (pin "8") (pinfunction "Pin_8") (pintype "passive"))
      (node (ref "JX1") (pin "S") (pintype "passive"))
      (node (ref "JX2") (pin "S") (pintype "passive"))
      (node (ref "JX3") (pin "S") (pintype "passive"))
      (node (ref "JX4") (pin "S") (pintype "passive"))
      (node (ref "JX5") (pin "S") (pintype "passive"))
      (node (ref "JX6") (pin "S") (pintype "passive"))
      (node (ref "Q1") (pin "1") (pinfunction "E") (pintype "passive"))
      (node (ref "RVX1") (pin "3") (pinfunction "3") (pintype "passive"))
      (node (ref "RVX2") (pin "3") (pinfunction "3") (pintype "passive"))
      (node (ref "RVX3") (pin "3") (pinfunction "3") (pintype "passive"))
      (node (ref "RVX4") (pin "3") (pinfunction "3") (pintype "passive"))
      (node (ref "U1") (pin "10") (pinfunction "GND") (pintype "unspecified"))
      (node (ref "U1") (pin "20") (pinfunction "GND3") (pintype "unspecified")))
    (net (code "5") (name "IN1")
      (node (ref "Q1") (pin "3") (pinfunction "C") (pintype "passive"))
      (node (ref "U1") (pin "12") (pinfunction "D3") (pintype "bidirectional")))
    (net (code "6") (name "LED1A")
      (node (ref "J28") (pin "12") (pinfunction "POT5_2_W") (pintype "passive"))
      (node (ref "LED1") (pin "1") (pinfunction "KA") (pintype "input"))
      (node (ref "U1") (pin "30") (pinfunction "D10") (pintype "bidirectional")))
    (net (code "7") (name "LED1B")
      (node (ref "J28") (pin "11") (pinfunction "POT5_1_CW") (pintype "passive"))
      (node (ref "RX5") (pin "1") (pintype "passive"))
      (node (ref "U1") (pin "18") (pinfunction "D9") (pintype "bidirectional")))
    (net (code "8") (name "LED2A")
      (node (ref "J28") (pin "3") (pinfunction "POT6_2_W") (pintype "passive"))
      (node (ref "LED2") (pin "1") (pinfunction "KA") (pintype "input"))
      (node (ref "U1") (pin "13") (pinfunction "D4") (pintype "bidirectional")))
    (net (code "9") (name "LED2B")
      (node (ref "J28") (pin "2") (pinfunction "POT6_1_CW") (pintype "passive"))
      (node (ref "RX6") (pin "1") (pintype "passive"))
      (node (ref "U1") (pin "14") (pinfunction "D5") (pintype "bidirectional")))
    (net (code "10") (name "MODE1")
      (node (ref "J28") (pin "15") (pinfunction "POT3_2_W") (pintype "passive"))
      (node (ref "RX3") (pin "1") (pintype "passive"))
      (node (ref "U1") (pin "26") (pinfunction "A0") (pintype "bidirectional")))
    (net (code "11") (name "MODE2")
      (node (ref "J28") (pin "6") (pinfunction "POT4_2_W") (pintype "passive"))
      (node (ref "RX4") (pin "1") (pintype "passive"))
      (node (ref "U1") (pin "23") (pinfunction "A3") (pintype "bidirectional")))
    (net (code "12") (name "NORM")
      (node (ref "J29") (pin "9") (pinfunction "J1_R_N") (pintype "passive"))
      (node (ref "RX12") (pin "1") (pintype "passive"))
      (node (ref "U1") (pin "16") (pinfunction "D7") (pintype "bidirectional")))
    (net (code "13") (name "Net-(D1-Pad2)")
      (node (ref "D1") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "R1") (pin "1") (pintype "passive")))
    (net (code "14") (name "Net-(D10-Pad1)")
      (node (ref "D10") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "D12") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "D6") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "D8") (pin "1") (pinfunction "K") (pintype "passive")))
    (net (code "15") (name "Net-(J9-Pad9)")
      (node (ref "J9") (pin "9") (pinfunction "Pin_9") (pintype "passive"))
      (node (ref "R1") (pin "2") (pintype "passive")))
    (net (code "16") (name "Net-(JX1-PadT)")
      (node (ref "JX1") (pin "T") (pintype "passive"))
      (node (ref "RX11") (pin "2") (pintype "passive")))
    (net (code "17") (name "Net-(JX1-PadTN)")
      (node (ref "JX1") (pin "TN") (pintype "passive"))
      (node (ref "RX12") (pin "2") (pintype "passive")))
    (net (code "18") (name "Net-(JX2-PadT)")
      (node (ref "JX2") (pin "T") (pintype "passive"))
      (node (ref "RX13") (pin "2") (pintype "passive")))
    (net (code "19") (name "Net-(JX2-PadTN)")
      (node (ref "JX2") (pin "TN") (pintype "passive"))
      (node (ref "RX14") (pin "2") (pintype "passive")))
    (net (code "20") (name "Net-(JX3-PadT)")
      (node (ref "JX3") (pin "T") (pintype "passive"))
      (node (ref "RX9") (pin "1") (pintype "passive")))
    (net (code "21") (name "Net-(JX4-PadT)")
      (node (ref "JX4") (pin "T") (pintype "passive"))
      (node (ref "RX15") (pin "1") (pintype "passive")))
    (net (code "22") (name "Net-(JX5-PadT)")
      (node (ref "JX5") (pin "T") (pintype "passive"))
      (node (ref "RX7") (pin "1") (pintype "passive")))
    (net (code "23") (name "Net-(JX6-PadT)")
      (node (ref "JX6") (pin "T") (pintype "passive"))
      (node (ref "RX17") (pin "1") (pintype "passive")))
    (net (code "24") (name "Net-(LED1-Pad2)")
      (node (ref "LED1") (pin "2") (pinfunction "AK") (pintype "input"))
      (node (ref "RX5") (pin "2") (pintype "passive")))
    (net (code "25") (name "Net-(LED2-Pad2)")
      (node (ref "LED2") (pin "2") (pinfunction "AK") (pintype "input"))
      (node (ref "RX6") (pin "2") (pintype "passive")))
    (net (code "26") (name "Net-(RVX1-Pad2)")
      (node (ref "RVX1") (pin "2") (pinfunction "2") (pintype "passive"))
      (node (ref "RX14") (pin "1") (pintype "passive")))
    (net (code "27") (name "Net-(RVX2-Pad2)")
      (node (ref "RVX2") (pin "2") (pinfunction "2") (pintype "passive"))
      (node (ref "RX2") (pin "2") (pintype "passive")))
    (net (code "28") (name "Net-(RVX3-Pad2)")
      (node (ref "RVX3") (pin "2") (pinfunction "2") (pintype "passive"))
      (node (ref "RX3") (pin "2") (pintype "passive")))
    (net (code "29") (name "Net-(RVX4-Pad2)")
      (node (ref "RVX4") (pin "2") (pinfunction "2") (pintype "passive"))
      (node (ref "RX4") (pin "2") (pintype "passive")))
    (net (code "30") (name "OUT1A")
      (node (ref "D6") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "D7") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "J29") (pin "12") (pinfunction "J3_T") (pintype "passive"))
      (node (ref "RX9") (pin "2") (pintype "passive"))
      (node (ref "U1") (pin "29") (pinfunction "D11") (pintype "bidirectional")))
    (net (code "31") (name "OUT1B")
      (node (ref "D8") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "D9") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "J29") (pin "6") (pinfunction "J4_T") (pintype "passive"))
      (node (ref "RX15") (pin "2") (pintype "passive"))
      (node (ref "U1") (pin "17") (pinfunction "D8") (pintype "bidirectional")))
    (net (code "32") (name "OUT2A")
      (node (ref "D10") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "D11") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "J29") (pin "14") (pinfunction "J5_T") (pintype "passive"))
      (node (ref "RX7") (pin "2") (pintype "passive"))
      (node (ref "U1") (pin "28") (pinfunction "D12") (pintype "input")))
    (net (code "33") (name "OUT2B")
      (node (ref "D12") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "D13") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "J29") (pin "8") (pinfunction "J6_T") (pintype "passive"))
      (node (ref "RX17") (pin "2") (pintype "passive"))
      (node (ref "U1") (pin "15") (pinfunction "D6") (pintype "bidirectional")))
    (net (code "34") (name "R1")
      (node (ref "D3") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "D4") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "J28") (pin "18") (pinfunction "POT1_2_W") (pintype "passive"))
      (node (ref "J29") (pin "4") (pinfunction "J2_T") (pintype "passive"))
      (node (ref "RX13") (pin "1") (pintype "passive"))
      (node (ref "U1") (pin "25") (pinfunction "A1") (pintype "bidirectional")))
    (net (code "35") (name "R2")
      (node (ref "J28") (pin "9") (pinfunction "POT2_2_W") (pintype "passive"))
      (node (ref "RX2") (pin "1") (pintype "passive"))
      (node (ref "U1") (pin "24") (pinfunction "A2") (pintype "bidirectional")))

Parts List

Find	Qty	Ref Des	Part Number
1	1	R35	1K
2	1	C1	10uF
3	5	D1-D5	BAT41
4	1	J9	Conn, IDC, Box, 2x5
5	2	LED1, LED2	LED_Dual_2pin
6	1	Q1	2N3904
7	1	R1	10
8	1	U1	ARDUINO PRO MINI

11	6	RX2, RX7, RX9, RX15, RX17	1K
12	2	RVX1, RVX2	100K
13	2	RX3, RX4	220
14	2	RX11, RX13	100K
7	6	JX1-JX6	Jack

ER-STIX

Contents

Features

Operation

Arduino Pro Mini

Arduino Pins

Controls

Jacks

J1 - Gate

J2 - OUT1 Random %

J3 - Out1A

J4 - Out1B

J5 - Out2A

J6 - Out2B

Schematic

Software

Pot/GATEs Test

Simplest Version 1

Still pretty simple - Version 2

More modes - Version 3

Build

Build Pictures

Nets

Parts List

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools