FTDI-49MM

Features

• FT230X USB-to-FTDI Serial
• USB B connector (not micro or mini, but the beefy USB B connector)
• FTDI compatible pinout
• 3.3V or 5V selection jumper
• Header for 5V power distribution
• Rx and Tx LEDs
• (4) 4-40 mounting holes
  • Mounts to 95mm to 45mm adapter
  • Stacks up with standoffs for use with other 95mm cards

Stackup with EP2 FPGA card

• Top to bottom of stackup

1. EP2C5-DB
2. Cyclone_II_EP2C5_Mini_Dev_Board Card
3. FTDI-49MM - (this card)
4. CARRIER95TO49MM

Pinout

1. GND
2. CTS* (in)
3. VCC
4. TX (out)
5. RX (in)
6. RTS* (out)

Assembly Sheet

FTDI-49MM Assembly Sheet