Screwduino
Revision as of 00:08, 30 December 2019 by Blwikiadmin (talk | contribs)
Features
- Arduino UNO Compatible (Arduino bootloader)
- ICSP header for program download
- Standard 6-pin FTDI connector
- 4-pin I2C connector
- Reset switch
- Other than power regulator only uses through-hole parts
- 5mm pitch screw terminal blocks
- Four (4) 4-40 mounting holes with clearance for screw heads, standoffs and/or nuts
- 7-12V DC on standard 2.1mm DC power connector
- Power selection jumper (FTDI, Regulator, Screw Terminals)
