SIMPLE-6802

Features

• Build of Grant Searles's Simple 6809 CPU
  • Runs MIKBUG
• 68B02 CPU
  • 1.8432 MHz
• 32KB SRAM
• 16KB EPROM/EEPROM
  • 16KB reserved
  • 8KB (28C64 parts can be used)
• 68B50 Serial Port (ACIA)
  • RS-232 port
  • Header for FTDI
  • 115,200 baud
• Reset switch with optional Power Supervisor
• 95x95mm card
• (4) 6-32 mounting holes

Memory Map

• 0x0000-0x7FFF 32KB SRAM
• 0x8000-0xBFFF Serial (ACIA)
• 0xC000-0xCFFF 16KB EPROM

Headers / Connectors

J1 - RS-232 Serial

• DB-9 Male
• Pinout

1. N/C
2. Receive
3. Transmit
4. Loop to pin 6
5. GND
6. Loop to pin 4
7. RTS
8. N/C
9. N/C

J2 / J5 - EPROM/EEPROM Select Jumpers

PART	PIN 1	PIN 27
27128 EPROM	VPP (5V)	PGM (5V)
27C256 EPROM	VPP (5V)	A14 (GND)
27C512 EPROM	A15 (GND)	A14 (GND)
AT28C64 EEPROM	N/C	WE (5V)
SST27SF256 FLASH	VPP (5V)	A14 (GND)
SST27SF512 FLASH	A15 (GND)	A14 (GND)

J3 - FTDI / TTL Serial

1. GND
2. RTS* (out)
3. +5V
4. Receive (in)
5. Transmit (out)
6. N/C

J4 - 5V Power

• 2x4 header

Software

SmithBUG Builds for SIMPLE-MC6802 CPU Card

• SIMPLE-6802 Wiki Page
• Pre-built for 4KB, 8K, 16KB EPROMs

Building Code

• Uses a68 assembler
  • Command line makes S-Record output
• Use srec_cat to shift from EPROM absolute addresses to 0x0000 as HEX file

4KB Build

A68 SMITHBUG_SIMPLE-6802_F000.ASM -l SMITHBUG_SIMPLE-6802_F000.LST -s SMITHBUG_SIMPLE-6802_F000.S
srec_cat SMITHBUG_SIMPLE-6802_F000.s -offset - -minimum-addr SMITHBUG_SIMPLE-6802_F000.s -o smithbug_F000.hex -Intel

8KB Build

A68 SMITHBUG_SIMPLE-6802_E000.ASM -l SMITHBUG_SIMPLE-6802_E000.LST -s SMITHBUG_SIMPLE-6802_E000.S
srec_cat SMITHBUG_SIMPLE-6802_E000.s -offset - -minimum-addr SMITHBUG_SIMPLE-6802_E000.s -o smithbug_E000.hex -Intel

16KB Build

A68 SMITHBUG_SIMPLE-6802_C000.ASM -l SMITHBUG_SIMPLE-6802_C000.LST -s SMITHBUG_SIMPLE-6802_C000.S
srec_cat SMITHBUG_SIMPLE-6802_C000.s -offset - -minimum-addr SMITHBUG_SIMPLE-6802_C000.s -o smithbug_C000.hex -Intel

SmithBUG Commands

;	M	MOVE MEMORY
;	E	CHANGE MEMORY
;	G	GO TO PROGRAM
;	R	PRINT
;	T	TRACE PROGRAM
;	@	ASCII CONVERSION
;	H	PRINTER ON
;	V	VIEW MEMORY
;	I	FILL MEMORY
;	J	JUMP TO TARGET PROGRAM
;	F	FIND 
;	Q	HARDWARE LOCATION
;	D	DISASSEMBLE CODE
;	K	CONTINUE AFTER BREAK
;	1	BREAKPOINT ONE
;	2	BREAKPOINT TWO
;	&	S1 LOAD PROGRAM
;	*	HARDWARE LOCATION (TBA)
;	O	ECHO ON
;	N	ECHO OFF

Mechanicals

Assembly Sheet

SIMPLE-6802 Rev 1 Assembly Sheet