ER-PROTO-01

Features

• Eurorack Prototyping card set
• 6 HP wide (30mm) front panel
• 3U tall
• Three card set
  • Board interconnect headers duplicated on headers
• 6 POTS
  • Series resistors on pot wiper
  • All 3 pot pins brought to top header
• 4 Jacks
• Tip/sleeve brought to header near middle/bottom
• Pots on top, jacks on bottom
  • Easier to adjust pots without bumping into pots
  • Pots more often accessed than jacks
• Large prototyping area
  • 58 nodes with 3 holes per node (29 per "side")
• +12V, -12V down board edges
• 5V/GND down center of card
• Bussed connections horizontally
• Front Panel with generic labels
  • Cover with White on Black P-Touch labels

Example

• Arduino NANO with quad Opamp example