Beaks Through Hole Peaks

• Through hole version of Mutable Instruments Peaks module
• Beaks Through-hole on Tindie
• Kristian Blåsol's GitHub
  • Beaks Schematics
• Mathias Levy's Github

Features

• Acts as
  • ADSR
  • LFO
  • Tap LFO
  • Drum
  • 4 step Sequencer
  • Trigger Delay
  • Trigger Randomizer
  • Drum Synth
• Buttons
  • (2) Manual Triggers - lighted buttons
• Inputs
  • (2) Trigger
• Outputs
  • 2 PWM Outputs
• Knobs
  • Parameters - mode dependent
  • Mode controls knob function
    • Split (2 knobs each)
    • Twin
    • Expert

Original Commercial Product

• Mutable Instruments Peaks page
  • A SWISS-ARMY KNIFE FOR PERCUSSIVE PATCHES
• Peaks is a dual-channel module – making it very useful for duophonic patches or for controlling/synthesizing the kick/snare rhythmic backbone of a patch.
  • Peaks provides 4 different functions in a small 8-HP package: ADSR, LFO / Tap tempo LFO, and drum synth.
  • Their common point?
    • They are all about generating an audio or CV signal in response to a trigger, and are all focused on rhythmic works.

• 8 HP
• 25mm depth
• +12V@60 mA, -12V@2mA

STM32 "Blue Pill"

• "Blue Pill" Pins

• "Blue Pill" Schematic

Notes

• Get the PCB set with panel and both PCBs for 9$ at Kristian's Tindie store
  • Tindie store
  • (Or) Download the Gerber files - sound-force page
• Front panel gerber by MyModularJourney
• Braids illustrated. all the waveforms explained
• Discord where you find the mi-th-braids channel and much more
• Gilet / Mutable Instruments Github for all her modules - SMT version
• Modular in a Week playlist
• Support Kristian's work on Patreon
• Kristian's Discord server - See mt-th-braids channel

Parts List Notes

• Parts List has JLCPCB part numbers
• SW1, SW2 - JLCPCB C620311 - Tactile Switch, 6mm, 14mm
  • Ordered on Ebay
• SW3, SW4 - JLCPCB C501573 - Illuminated switch (ordered along with PCB]
• LEDs have Green body when off, but light up in yellow when illuminated
• Can use 100K pots?
  • The pots are used to set levels into the STM32 analog pins
• 5pcs Red Common Cathode 7 segment display - MAKE SURE TO CHOOSE COMMON CATHODE
• Get a STM32 Programmer here
  • The STM32F103C8T6 is the 64kb version and thus too small but SOMETIMES they are 128kb
• STM32F013CBT8 (128kb version) on ebay... not that many to choose from :/
• Added cap ref des C3, C4, C7, C12

• LEDs go Kathode down

Beaks Through Hole Build